Site Guarding and GDU Use TBT

• Conducted on

  Date

• Name(s)

• Please read PICHTBT15 Site Guarding TBT

Assessment

• Which of the following can be used to give information on the correct site set up?

  Select The PICH Telecoms Health and Safety Handbook The Street Works and Road Works Code of Practice (The red book) Google

  • The PICH Telecoms Health and Safety Handbook
  • The Street Works and Road Works Code of Practice (The red book)
  • Google

• INCORRECT- The Street Works and Road Works Code of Practice (The red book) is where information on site set up can be found. A copy of this can be located using the QR code at the end of the site-specific risk assessment template.

• CORRECT- The Street Works and Road Works Code of Practice (The red book) is where information on site set up can be found. A copy of this can be located using the QR code at the end of the site-specific risk assessment template.

• At what stage should barriers be removed from site?

  Select As soon as work has been completed/finished. Just as work is finishing. Once work has finished/been completed and all tools, excavated material, equipment and plant have been placed back onto the vehicle.

  • As soon as work has been completed/finished.
  • Just as work is finishing.
  • Once work has finished/been completed and all tools, excavated material, equipment and plant have been placed back onto the vehicle.

• INCORRECT- Barriers must only be removed once work has finished/been completed and all tools, excavated material, equipment and plant have been placed back onto the vehicle.

• CORRECT- Barriers must only be removed once work has finished/been completed and all tools, excavated material, equipment and plant have been placed back onto the vehicle.

• Please read PICHTBT16 GDU TBT

Assessment

• In which order must gas testing be performed?

  Select Lifting the lid, above water level/middle of chamber, bottom of chamber, each duct mouth. Continuous monitoring thereafter. On lifting the lid only. Continuous monitoring once works have started.

  • Lifting the lid, above water level/middle of chamber, bottom of chamber, each duct mouth. Continuous monitoring thereafter.
  • On lifting the lid only.
  • Continuous monitoring once works have started.

• INCORRECT - Gas testing must occur on lifting the lid, above water level/middle of chamber, bottom of chamber, each duct mouth. Continuous monitoring thereafter.

• CORRECT - Gas testing must occur on lifting the lid, above water level/middle of chamber, bottom of chamber, each duct mouth. Continuous monitoring thereafter.

• a GDU must always be

  Able to test for 4 gases

  Fully calibrated

  In good working condition

  All of the above

• INCORRECT - The correct answer is all of the above because a GDU must be able to test for 4 gases, be fully calibrated and be in good working condition.

• CORRECT - The correct answer is all of the above because a GDU must be able to test for 4 gases, be fully calibrated and be in good working condition.

• I agree that I have read and understand PICHTBT15 and PICHTBT16

• Signature

  Sign

• Signature

  Sign

• Signature

  Sign

• Signature

  Sign

• Signature

  Sign

• Signature

  Sign