Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

OSHA and HMCC General Requirements and Postings

  • Is a stocked first aid cabinet on site and inspected weekly?

  • Does this site keep and maintain a first aid log?

  • Are emergency telephone numbers posted by hard wire phones?

  • Is the 5-in-1 poster & Emergency Action Plan posted?

  • Are toolbox meetings being conducted and documented?

  • Are the MSDS & Safety Manual on site and available to employees?

Personal Protective Equipment

  • Are employees wearing hardhats, and eye protection?

  • Are employees wearing ear plugs, face shields, hi-visibility vests, and gloves, where they are required?<br>

  • Are employees wearing proper clothing and work boots?

  • Did Employees inspect PPE prior to the start of their shift?

Personal Fall Arrest Systems

  • Are employees using these systems when required?

  • Have the employees been trained in the use of these systems and using the systems correctly?

  • Is the equipment installed correctly and in good condition?

  • Are proper tie-off points used?

Fire Protection

  • Have employees been trained in the use of fire extinguishers?

  • Are extinguisher inspections current and extinguisher in good working order?

  • Is there a fire extinguisher within 25 feet of all hot work areas?

  • Do fuel cans have flame-arrester screen and self-closing lid?

  • Is there at least one 20 lb extinguisher located 25 to 75 feet from outside storage tanks and the storage tank(s) grounded?

  • Are adequate "NO SMOKING" signs provided in fuel storage areas?

  • Are portable storage containers properly marked?

Signs and Barricades

  • Are signs and barricades used to protect the public from job hazards?

  • Are the signs and barricades adequate?

  • Are employees trained in the difference between caution and danger tape?

  • Is caution and danger tape being used properly and removed when not needed?

House Keeping, Material Handling, and Rigging

  • Are all aisle-ways and emergency routes clear of materials and debris?

  • Are items stacked low enough to prevent materials from falling?

  • Are nails removed from scrap lumber?

  • Are materials on upper floors secured to prevent displacement?

  • Is rigging inspected daily and in good condition when in use?

  • Are nylon straps free from cuts, frayes, or damage?

  • Do wire ropes have legible tags and are free from damage? (not kinked, crushed, or bird caged)

Tools

  • Are tools requiring guards equipped and in good working order?

  • Are hazardous parts guarded?

  • Are electrical cords in good condition?

  • Are the data plates on tools legible?

  • Are tools being inspected and used properly for the task?

  • Are hoses on the air compressor secured?

  • Are employees trained to operate powder-actuated tools?

Electrical

  • Are GFCIs being inspected on a weekly basis and in good working order?

  • Are temporary lights properly suspended?

  • Are all electrical boxes, cords, receptacles, breakers, etc. being used for their intended use per NFPA, NEC, OSHA and their UL rating?

  • Are cords running from boxes protected from cutting or pulling from box?

  • Are extension cords being inspected daily?

Ladders

  • Are the spreaders on step ladders locked?

  • Are ladders inspected and in good condition with all required labels?

  • Do side rails extend 36 inches above landings?

  • Are extension or job made ladders tied off or is an employee holding the ladder?

  • Are employees using ladders properly?

  • Are job made ladders built properly (no double-headed nails)?

  • Is the ladder placed at the proper angle?

  • Are the manufacturer's labels affixed and legible?

Excavations

  • Are employees protected from falling into pier or similar holes?

  • Is the competent person present?

  • Are excavations that are 4 feet or deeper in depth properly sloped, benched or shored?

  • Have provisions been made to control water accumulation?

  • Have excavations of 20 feet or more in depth been designed by a PE?

  • Is heavy equipment kept a safe distance from the edge and the spoil pile a minimum of 2' from the excavation?

  • Has proper access and egress been provided?

  • Are the utility locates less than 10 days old and clearly marked?

  • Is excavation properly barricaded and signs posted?

  • Are underground utilities protected while excavation is open?

Floor and Wall Openings, Stairwells and Roofs

  • Do all holes (2" or more) or perimeters that are 6 feet or more above a lower level have guardrails or hole covers?

  • Are hole covers secured, marked "hole" or "cover" and capable of supporting intended loads?

  • Do guardrails and stair rails meet OSHA requirements?

  • Is proper fall protection provided on the roof?

  • Are stairs and ladders properly constructed (no double-headed nails)?

  • Are warning lines flagged eery 6' with high visibility material?

  • Is there access/egress for changes in elevation greater than 19" for walking/working surfaces?

  • Are stacked materials kept at a safe distance from toe boards?

Sanitation

  • Are toilet facilities adequate and reasonably clean?

  • Are drinking cups placed into the trash containers and the trash containers located next to all water cans?

  • Are water containers cleaned and clearly marked of the contents?

Welding and Cutting

  • Are all leads and stringers in good condition?

  • Are bare spots in welding leads taped?

  • Is the first 10 feet of welding leads free from repair?

  • Is proper eye protection being used?

  • Are all cylinders secured in an upright position?

  • Is there at least one 10 lb extinguisher within 50 feet of oxygen and acetylene storage areas?

  • Are oxygen and acetylene bottles stored 20 feet apart?

  • Is there a fire watch for welding and cutting above combustible materials?

  • Is cutting torch in good working order?

Scaffolds

  • Is fall protection provided for employees erecting or dismantling scaffold?

  • Are scaffolds set on firm, secure footings with base plates and mud sills?

  • Are scaffolding components inspected and in good condition?

  • Has the Scaffold been tied off every 30 feet in length and every 25 feet in height (ties must be installed when the height of the scaffold is more than 4 times when the height of the scaffold is more than the minimum base width).

  • Are scaffold boards properly overlapped and secured? (12")

  • Are rolling scaffolds moved correctly? (Not being surfed from the platform)

  • Is fall protection and falling object protection provided?

  • Have employees been trained in the hazards associated with scaffolds and scaffold work?

  • Is the area below the scaffolding barricaded or toe-boards erected?

  • Have the scaffolding been inspected?

Aerial Lifts

  • Are employees using proper fall protection?

  • Are employees remaining on the platform at all times?

  • Is the gate or chain closed when occupied?

  • Are lifts set on level ground, per manufacturers' recommendations?

  • Is operator trained?

  • Are tools and material secured from displacement?

  • Has the equipment been inspected prior to use?

  • Are lanyards attached to proper anchorage points?

  • Is the lifting capacity visible and appropriate for the task?

Signatures and Comments

  • Additional Comments:

  • Inspected by:

  • Project Manager

  • Inspected on:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.