Spandrel Panel Quality Inspection

• Document No. (Automatically generated, do not overwrite)

• Site

  Select

• Conducted on

  Date

• Prepared by

• Location
  Address

• Is the site working to the most up to date drawings?

  Yes

  No

  N/A

• Photo of drawing register.

  Media

• Are there any further drawings required?

  Yes

  No

  N/A

Substrate

• Is the Substrate in Good Condition

  Good

  Fair

  Poor

  N/A

• Has the substrate been signed off by the project engineer

  Yes

  No

  N/A

• Are Additional works required to substrate - If so, please list and confirm Commercial have been notified

Cavity Barriers

• Have Cavity barrier brackets been installed using the correct quantity of fixings as per Topek Installation drawing IG002

  Yes

  No

  N/A

• Have brackets been installed using the correct type of Stainless Steel un-washered fixing

  Yes

  No

  N/A

• Have the cavity brackets been installed at the correct centers suited to the cavity barrier Length as per IG002

  Yes

  No

  N/A

• Has the Vertical cavity barrier been installed as to take precedence over the Horizontal

  Yes

  No

  N/A

• Have Non Vented vertical barriers been installed to ensure 5mm compression to back face of finished facade

  Yes

  No

  N/A

• Have Vented Horizontal barriers been installed with a minimum of 10mm Gap and maximum gap of 25mm (VFB) or 44mm (VFB Plus)

  Yes

  No

  N/A

• Are all Junctions of Cavity Barriers been installed tightly with no gaps

  Yes

  No

  N/A

• Has the manufacturer attended site and provided a report for each area of work

  Yes

  No

  N/A

Insulation

• Has the fixing layout been installed as per Installation Guide - IG003

  Yes

  No

  N/A

• Have the correct fasteners been used as per Topek details and IG003

  Yes

  No

  N/A

• Has the insulation been fixed in a brick bonded pattern with no gaps

  Yes

  No

  N/A

Facade System

• Has the facade system been installed as per Topek Detail drawings

  Yes

  No

  N/A

• Has the correct Stainless Steel fixings been used as noted described on Topek details

  Yes

  No

  N/A

• Has the fixing arrangement as noted on Topek details been checked

  Yes

  No

  N/A

• Have all fixings been installed within minimum edge distance requirements

  Yes

  No

  N/A

Flashings

• Have all flashings been installed as per Topek Installation Guidelines - IG004

  Yes

  No

  N/A

• Are all fixings used on Flashings stainless steel

  Yes

  No

  N/A

• Are all Flashings free of defect and the correct colour

  Yes

  No

  N/A

• Are all butt straps in place and lapped & fixed as per Topek details

  Yes

  No

  N/A

Any Other findings

• Insert any other significant findings

• Auditor

  Sign