SSF 014 Hot Work Permit

• Job Number

• Site

  Select

• Conducted on

  Date

• Site Supervisor

• Location
  Address

THIS PERMIT IS ONLY VALID FOR THE DAY OF ISSUE

• On Every Occasion Hot Work Is Carried Out A New Permit Is To Be Issued

• This permit is required for all operations in high risk areas involving welding/cutting equipment and disk cutters or any other work process that produces sparks, flames or excessive heat.

PART ONE: To be completed prior to hot works

• Exact Location of the Works

• Scope of Works

• Starting from

  Date

• Planned finish at

  Date

• N.B All Hot works MUST be stopped at least least 60 minutes before site closure for the day.

• At all times the Site Supervisor is responsible for ensuring compliance by all operatives of the Company Hot Work Fire Safety Precautions and confirms the following:

• The above location has been thoroughly inspected and safety precautions carried out

  Yes

  No

• Why is the response no?

• Where applicable automatic fire alarm and detection systems/zones have been isolated

  Yes

  No

  N/A

• Why is the response no?

• All solid combustible material has either been removed or adequately protected against sparks

  Yes

  No

  N/A

• Why is the response no?

• A check has been made to ensure there no flammable liquids or gases within 15 metres

  Yes

  No

  N/A

• Why is the response no?

• Smoking is not permitted in the working area (except in approved designated areas)

  Yes

  No

• Why is the response no?

• The operatives have familiarised themselves with the means of escape from the working area and the building, and are fully competent in the use and operations of the equipment

  Yes

  No

• Why is the response no?

• A competent person is to stand by with the correct type and serviceable fire extinguisher/ hose reel while the operation is in progress

  Yes

  No

• Why is the response no?

• The operatives have had the nearest fire alarm and or telephone pointed out to them and have been informed what to do in the event of a fire or emergency

  Yes

  No

• Why is the response no?

• Protective clothing is to be worn at all times during the works

  Yes

  No

• Why is the response no?

• Additional restrictions, if applicable

• Signature of Operative undertaking work - I understand the requirements of this permit.

  Sign

PART TWO: To be completed after Hot Work

• This is to state that I have thoroughly inspected all work areas and all adjacent areas to which heat and sparks might have spread on initial completion of hot Work operations, and at least 60 minutes after, no smouldering fires were discovered. A photograph of the area has been taken. This permit is now cancelled.

  Media

• Signed by Site Supervisor

  Sign

• C. G. Comley & Sons Limited T/A Comley Demolition. Registered office: Southern Way, Rye Common, Odiham, Hook, Hampshire, RG29 1HU. Telephone: 01256 702178. Email: comley@comleydemolition.co.uk Company Registration Number: 01672195