SSF 027 Safety Harness Inspection

• Job Number

• Site

  Select

• Conducted on

  Date

• Site Supervisor

• Location
  Address

• The Personal Protective Equipment Regulations 1992 (as amended) require employers to maintain fall arrest equipment in good repair, including appropriate replacement. In addition, the Work at Height Regulations 2005 require that equipment which is exposed to conditions causing deterioration which is liable to result in dangerous situations should be inspected at suitable intervals and each time exceptional circumstances which might jeopardise safety have occurred.

• Each safety harness is to be inspected each time BEFORE use and should be examined by a competent person, other than the user, at least every twelve months, recording this result along with other relevant details on the inspection record or similar document.

• If used to arrest a fall the product MUST be withdrawn from use for inspection.

Inspection Details

• Type of Harness being inspected (Make & Model)

• Serial number & / or Identifying Mark (take photograph if applicable)

• Does the Harness Pass or Fail - show signs of wear & tear

  Pass

  Fail

• DO NOT USE HARNESS

• Any comments or further action?

Site Supervisor Sign-off

• Add signature

  Sign

• C. G. Comley & Sons Limited T/A Comley Demolition. Registered office: Southern Way, Rye Common, Odiham, Hook, Hampshire, RG29 1HU. Telephone: 01256 702178. Email: comley@comleydemolition.co.uk Company Registration Number: 01672195