Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Employee Name
Manufacturer: Crown
-
Vehicle Model #
Operator able to identify and communicate control functions.
-
Steering: Control is operated by simply swinging the handle to the left or right
-
Steering: Operator can identify and perform correct clockwise /counter-clockwise steering<br><br>
-
Power Disconnect Lever: In case of any electrical malfunction, the power disconnect lever will shut off all power to your truck.
-
Brakes: Properly identified and engages by lifting left foot off floor pedal
-
Speed/Truck Direction: Can properly identify hand control and use of for direction and speed of lift
-
Horn: Can identify location and properly use
-
Overhead Guard: Can properly identify lever that raises and lowers guard
-
Safety Reverse Switch: Contact causes low speed directional change
Fork Controls Can identify and perform the following:
-
Lift/ Lower
-
Tilt
-
Right and Left Shift
Operator able to adequately perform or exhibit proper operation behavior
-
Proper completion of a Pre-Shift Operational Check<br>
-
Proper stance on vehicle platform
-
Operator maintains arms and legs within the confines of the vehicle
-
Smooth engagement of travel. Operator clearly understands the proper rotation for required direction
-
Operator can perform necessary fork controls to properly move pallets
-
Operator visually checks prior to backing or changing direction
-
Operator uses horn appropriately at intersections, blind corners, etc.
-
Operator is able to perform a controlled stop of the vehicle (with or without a load)
-
Operator is able to stop the vehicle in quickly replicating an emergency stop
-
Operator adjusts to proper stopping distances on wet or slippery surfaces
-
Operator can properly engage and disengage the coast selector
-
Operator properly stops and sounds horn prior to driving through strip curtains and Rytec doors
-
Operator uses overhead guard properly when both lifting overhead and entering trailers
-
Operator properly travels with forks trailing
-
Operator maintains safe driving distance of at least 3 truck lengths
-
Operator properly operates lift around pedestrians. Does not drive up to pedestrians and fixed objects.
-
Operator properly uses the High and Low speed controls in respect to conditions & environment
-
Operator stops vehicle prior to getting off
-
Operator is able to remove product product from forks and does not block exits or travel paths
-
Operator uses appropriate speed when entering a trailer (and follows proper trailer entering procedures)
-
Operator uses proper precaution around dock plate that are not engaged in a trailer
-
Employee has valid driver's license, or has passed a vision test comparable to the State DMV vision test
-
Trainer Name
- Kensy Sanon
- Devin Holland
- Ervin Gavin
- Torey Moore
- Brandon Brown
- George Cokley
- Roosevelt St. Surin
- Grady Mcclendon
- Fabricio Medina
-
Trainer Signature
-
Employee Signature
-
Department
- Receiving
- Inventory Control
- Maintenance
- Shipping
- International Sales
- Transportation
-
Observation Test Date
