Site Info
-
Site Conducted
-
Conducted on
-
Prepared by
-
Location
-
Postcode
Exterior Info
-
Where is the Sky Dish Located?
-
Image of the dish
-
Is the dish compatible with a Sky Q LNB?
-
Will the dish need to be replaced?
-
What access equipment is required to safely work on the LNB/Dish?
- None
- Small Steps
- 2 Section Straight Ladders
- 3 Section Combi Ladders
- Roof Apex Ladders
- Mi-Tower Standard
- Mi-Tower PLUS
- Full Size Mobile Scaffold Tower
- Genie/Mupe
-
How many men required for install?
-
In your opinion, is the sky dish location suitable and fit for purpose?
-
If 'No' please explain why?
-
How many feeds go down to the existing boxes?
-
Do any EXTERNAL cables need replacing or NEW feeds adding?
Interior Info
-
Where are the Sky Boxes located?
-
How many Sky Boxes are there?
-
Please note the existing sky card numbers
-
Is there sufficient power for the Sky Boxes?
-
Is there sufficient power to add a Network Switch, dSCR Multiswitch and any DACs/Audio Delays?
-
How many additional DOUBLE GANG sockets are required?
-
Is there Sufficient physical space in the rack for the NEW Sky-Q Boxes, A Network Switch, any dSCR Multiswitches and any DAC's/Delays?
-
Qty of DAC's required for audio breakout?
-
How many existing DAC's can we reuse?
-
Where is the audio signal from each CURRENT sky box connected to?
- Optimal
- BSS Soundweb Blu100
- BSS Soundweb BIB
- Cloud Z4/Z8
- DJ Mixer
- Mixer Amp
- Other
-
Please specify 'Other'
NETWORKING
-
Where is the existing network equipment?
Video Infrastructure.
-
How are the EXISTING sky channels changed?
- Sky remote to an RF Magic eye
- Sky remote to an NHD/JAP system
- Sky remote directly to the boxes
- HDA UControl
- Demopad
- Enado
- Other
-
Please specify 'Other'
-
What type of video distribution is installed at this venue?
- RF Analogue
- RF DVB-T Modulators
- Wyrestorm NHD
- Wyrestorm Matrix
- Just add Power
- HDAnywhere MHUB Matrix
- Pulse8 Matrix
- Enado
-
How many outputs does the RF Amplifier have?
-
How many Analogue RF Modulators are connected to the system?
-
What make and model Network Switch(es) is/are installed?
-
Please indicate a suitable location to add in a second network switch or addition 6u rack. (photo's)
-
As a result of adding in another 6u rack, will the NHD Networking need recabling?
-
What series NHD TX/RX are installed in the venue?
-
What model(s) are installed?
-
What make and model network switch is installed to control the JAP system?
-
How is the JAP system controlled/switched?
-
What type/series of JAP units are installed?
-
What model HDAnywhere MHUB matrices are installed in the venue?
-
What model Pulse8 matrices are installed in the venue?
-
How TV's are there in the trading area?
-
How many Projectors/Screens are there in the trading area?
SUPPLIMENTARY INFORMATION
-
Are there any other notable points that need raising about the site that may impact a successful Sky-Q upgrade?
Celestra
-
Where is the AV Rack located
-
Where is the AV Rack Located
-
Example of EPOS comms cabinet
-
Is the AV Rack located in the same room as the EPOS comms cabinets
-
Where is the comms cab located?
-
Please list below cabling requirments
-
Do you see any challenges with the cabling route between comms cab and AV rack?
-
Please detail any possible challanges and why? With recommended solution if possible?
-
Please include any supporting photos of cabling route
-
Is there a possibility the route runs externally?
-
Provide details on cable route. Provide as much details as possible
-
Length of cable run from the office to the AV position (avg in meters)
-
Will there be trunking required?
-
Colour of trunking required?
- White
- Brown
- Black Conduit
-
Number of metres required?
-
Detail cabling route
-
Take a perspective photo of the cab and AV rack
-
Provide annotated photos of cabling route
-
Is there a patch panel in the AV rack?
-
Example of unloaded patch panel
-
Is the patch panel loaded or unloaded?
-
Model of Patch Panel?
-
Is there room for a patch panel?
-
Provide photo of location
-
Provide photo of where should data be terminated on the wall?
-
Is an AV switch required?
-
Is there existing PDU in AV rack?
-
Is there spare socket on the PDU?
Comms Cab
-
Size of Comms cab
- 6u
- 9u
- 12u
- 15u
- 18u
- 21u
- None
-
Where is the switches and routers situated
-
Provide photo
-
Example of unloaded patch panel
-
Model of Patch Panel?
-
Is the patch panel loaded or unloaded?