Surveyor's Site Observation - Trainer Audit

• Site conducted

  Select

• Observer

• Surveyor

• Contract Number

• Customer Name

• Date of Visit

  Date

• Surveyor's Signature

  Sign

• Trainer's Signature

  Sign

• Surveyor's comments

HEALTH & SAFETY

• Is the surveyor wearing any of the following;

  Hi-Viz only

  Safety Footwear only

  Hi-Viz & Safety Footwear

  Neither

• Discuss the use of PPE with the surveyor and that whilst not mandatory, it's good practice to wear Safety Footwear whilst on site and a hi-viz jacket whilst walking from the car to a customer's property. If visiting an Installation depot, PPE is mandatory.

  Media

• Photograph the Surveyor wearing their jacket.

  Media

• Photograph the Surveyor's foot apparel.

  Media

• Photograph the Surveyor wearing their PPE for our records

  Media

WORKING AT HEIGHT

• Did the surveyor use his ladders to measure any of the frames?

  Yes

  No

• Are the Surveyors ladders in good working order and are they free from defects and/or damage?

  Yes

  No

• Photograph the ladders for our records and inform the Surveyor that they must not use any ladder which is damaged or defective and to replace them as soon as possible. Ask the Surveyor to send you a photo once their ladders have been replaced.

  Media

• Please photograph the condition of the Surveyor’s ladders for our records, including rungs, stiles, feet & top. If Telescopic ladders are being used, please photograph said ladders in the fully extended position as well.

  Media

• Does the Surveyor have a Ladder Mate to prevent outward movement of their ladder?

  Yes

  No

• Inform the Surveyor that without a Ladder Mate to prevent outward movement at the bottom, no ladder work can be undertaken. Inform the Surveyor that they must call into their nearest Installation Depot and equip themselves with the aforementioned Ladder Mate. Ask the Surveyor to send you a photograph once they have one in their possession.

  

• Is the Ladder Mate in good working condition?

  Yes

  No

• Photograph the device and inform the surveyor it must be replaced before any further ladder work can be undertaken. Ask the Surveyor to send you a photograph once it has been replaced.

  Media

• Photograph the device for our records.

  Media

• Does the Surveyor have a safety helmet complete with chin strap, that complies to CE EN 397 for falling objects and EN 12492 for impact?

  Yes

  No

• Inform the Surveyor that without a safety helmet no ladder work can be undertaken. Inform the Surveyor that they must call into their nearest Installation Depot and equip themselves with the requisite helmet (Evolite: Skyworker) as soon as possible and send you a photograph once in their possession.

  

• Is the helmet in good condition, with no signs of damage?

  Yes

  No

• Photograph the defective parts of the helmet and inform the Surveyor that said helmet is no longer fit for purpose and that no ladder work can be undertaken until it (helmet) has been replaced.

  Media

• Please photograph the helmet for our records.

  Media

SURVEY OBSERVATIONS

• Did the surveyor explain all the details on the contract?

  Yes

  No

• Explain the importance of fully discussing the contract details with the customer but not relying solely on them. Use the contract 'AS A GUIDE' only. Assume it's wrong and you'll learn to question everything.

• What can he do to improve?

undefined

• Did the surveyor take the customer to each frame and explain the design/details?

  Yes

  No

• Explain the importance of physically taking the customer to each frame and demonstrating how said frame will open, where the bars are (transomes/mullions but avoid using those technical terms) and if necessary how it will look different from others on the same elevation. (The customer will often be unaware that the rep has put the lounge opener to the left, but the bedroom one, directly above it, to the right) Don't be afraid to have a conversation with the customer if you don't think something will look right. It's often too late when we turn up with something which isn't aesthetically pleasing.

• What can he do to improve?

undefined

• Was the surveyor's approach to the customer friendly and courteous?

  Yes

  No

• The surveyor can be the difference between a job cancelling and a job going ahead. A smile and good demeanour go a long way, especially if the customer is already thinking of going elsewhere.

• What can he do to improve?

undefined

• Did you feel the surveyor looked for understanding in the customer?

  Yes

  No

• Explain the importance of making sure the customer understands what is being explained. Don't take for granted that the customer knows what you're talking about, this may well be the first time the customer is having new windows so use laymans terms and keep explaining until you see the lightbulb go on.

• What can he do to improve?

undefined

• Did you feel the customer understood what was being explained?

  Yes

  No

• As with the above keep explaining until it's lightbulb time. You'd be surprised how many people will just nod and agree rather than admit they don't know something.

• What can he do to improve?

undefined

• Did the surveyor confirm the positions of any transoms/mullions?

  Yes

  No

  N/A

• Explain the importance of using laymans terms when explaining transom/mullion positions. It's much better to physically grab the bars and ask 'is this bar staying where it is or would you like it lowering so it's easier to reach?'. Always document the position on an Order Variation to avoid issues on the day of fit. Never assume the rep has had the conversation or rely on the e-contract.

• What can he do to improve?

undefined

• Did the Surveyor pick up on any potential FENSA failures?

  Yes

  No

  N/A

• What FENSA issues did the Surveyor pick up on?

  Select A - Structure B - Means of escape F - Ventilation K - Safety glass K - Restrictors M - Access Q - Enhanced security N/A

  • A - Structure
  • B - Means of escape
  • F - Ventilation
  • K - Safety glass
  • K - Restrictors
  • M - Access
  • Q - Enhanced security
  • N/A

• What can he do to improve?

undefined

• Were there any FENSA issues the Surveyor missed?

  Yes

  No

  N/A

• Which FENSA issues did the Surveyor miss?

  Select A - Structure B - Means of Escape F - Ventilation K - Safety Glazing K - Restrictors M - Access Q - Enhanced Security N/A

  • A - Structure
  • B - Means of Escape
  • F - Ventilation
  • K - Safety Glazing
  • K - Restrictors
  • M - Access
  • Q - Enhanced Security
  • N/A

• Explain the importance of knowing and understanding the Building Regulations that govern our industry. This is your chosen profession so it's imperative you know this stuff

undefined

• Did the surveyor measure in more than one place in width/height?

  Yes

  No

• Explain the importance of measuring in more than one place as an aperture can slope dramatically one way or the other. Failure to accurately document the size of the opening can potentially lead to mismeasures

  

• Width

• Height

• Comment

• What can he do to improve?

undefined

• Did the surveyor take a diagonal size and check it against his make size?

  Yes

  No

• Explain that by documenting the diagonal aperture size and then checking it against the make size diagonal it will help avoid mismeasures, especially 100mm syndrome where the correct brick line sizes have been documented but the make size has been written down incorrectly. In 2019 we had 119 x 100mm mismeasured frames, which accounts for 7% of the total remakes for that year

  

• What can he do to improve?

undefined

• Did the surveyor measure any bays at the critical points (b-span/proj/tie/diag)?

  Yes

  No

  N/A

• Which critical points did he miss?

  Select Back Span Projection Tie Size Diagonal

  • Back Span
  • Projection
  • Tie Size
  • Diagonal

• Explain the importance of correctly documenting the required information and then using this as a double check to ensure the facets will fit.

• Which of the following critical points did he measure?

  Select Back Span Projection Tie Size Diagonal

  • Back Span
  • Projection
  • Tie Size
  • Diagonal

undefined

• If there was a fascia above the window, did the surveyor measure the drop?

  Yes

  No

  N/A

• Explain the importance of ensuring the fascia drop is measured (using a square) from the back edge to the front and then the necessary information documenting and the appropriate actions taken

• What can he do to improve?

undefined

• Did the surveyor document any and all changes on an Order Variation?

  Yes

  No

  N/A

• Explain the importance of documenting everything that contradicts the contract on an Order Variation as well as anything that needs clarity (e.g. Transome/mullion positions)

• What can he do to improve?

undefined

• Did the surveyor complete a Contract Evaluation Form?

  Yes

  No

• Ensure the surveyor is aware not to put superfluous information on this form and to only use it to highlight concerns. Any other issues can be documented on an Order Variation.

• Ensure the surveyor is aware of when to fill in a Contract Evaluation and the importance of highlighting potential issues to Head Office.

undefined

• Is an Access Solution required to complete any part of the installation or Survey?

  Yes

  No

  N/A

• Did the surveyor accurately document the requirements for any access solutions? Including but not limited to, overhead power cables, access to the property, any parking restrictions for the scaffolding wagon, good, full elevation photos where scaffolding will be erected.

  Yes

  No

• Explain the importance of accurately documenting the scaffolding requirements on the appropriate form(s), including dimensions of the proposed solution and inserting lines onto their photos to highlight the location & position of said Access Solution. It is also imperative that the surveyor accurately document any overhead cables and that these will need to be sheathed.

• What can he do to improve?

undefined

• Did the surveyor explain to the customer why scaffolding was required?

  Yes

  No

• It's much easier for you to explain why an access solution is required than it is for someone in an office to do so. You can physically walk the customer outside and show them where it's required and why.

• What can he do to improve?

undefined

• Did the surveyor do a visual and/or push test check for asbestos and complete the necessary paperwork?

  Yes

  No

  N/A

• Show the surveyor the image and ensure he understands the importance of checking for asbestos

  

undefined

• Did the surveyor take any internal photos?

  Yes

  No

  N/A

• Explain that internal photos are mandatory and reiterate the importance of documenting the condition of the internal reveals and any other areas which may cause contention during installation

• What can he do to improve?

• What did he take photos of internally

  Select Internal Reveals Full height frame shots Internal damage (e.g. sink/bath/blinds) Cracks to the internal walls

  • Internal Reveals
  • Full height frame shots
  • Internal damage (e.g. sink/bath/blinds)
  • Cracks to the internal walls

undefined

• Did the surveyor take full elevation shots and photos of potential issues (in and out)?

  Yes

  No

• Explain it's mandatory to take full elevation photos of all the frames we're measuring, even if we're only doing one frame on the back of the house we still need a full shot of the rear. We also need photos highlighting any damage to show what it was like before we started the installation

• What can he do to improve?

• What did he take photos of?

  Select Full elevation shot - Front Full elevation shot - Rear Full elevation shot - Side Photos of potential issues

  • Full elevation shot - Front
  • Full elevation shot - Rear
  • Full elevation shot - Side
  • Photos of potential issues

undefined

• Are there any doors on the order?

  Yes

  No

• Did the surveyor take an accurate door swing measurement?

  Yes

  No

• If the surveyor gets into the habit of always checking he won't make assumptions

• Did the surveyor discuss the threshold heights of any doors?

  Yes

  No

• It's imperative you have the conversation around threshold heights. For all you know the customer is having 25mm solid oak flooring put down next week. We then turn up and the door won't open. In the customer's mind they had a conversation with the sales person who passed the information onto you. Always ask the question, 'just to check Mrs Smith, you're not having new inch thick flooring put down are you?'. That way you've boxed it off.

• What can he do to improve?

• Did the Surveyor show the customer a door brochure to confirm styles/deco options/furniture etc...?

  Yes

  No

• Explain to the Surveyor, the importance of ensuring the customer is aware of what they've ordered. They may well measure the door perfectly but still have a remake due to incorrect specification(s).

undefined

• Are there any bulkheads/obstructions likely to cause issues?

  Yes

  No

• Has the Surveyor discussed these with the customer and provided a solution and documented this on an Order Variation

  Yes

  No

• Explain the importance of accurately documenting the requirements both for the customers peace of mind and your own

• What can he do to improve?

undefined

• Has the surveyor specified the correct thresholds on all doors?

  Yes

  No

  N/A

• There's little point in having a lengthy conversation (or not as the case may be) to then put a threshold down which is totally unsuitable for the customer/property/area. A standard threshold on a zero buried will most definitely clear the internal flooring but so will various others. Think about, discuss it, document it.

• What can he do to improve?

undefined

• Has the surveyor checked for the presence of lintels?

  Yes

  No

• Under Approved Document A we have a legal obligation to ensure the apertures we're installing to are structurally sound

  Media

• What can he do to improve?

Structural Awareness

• During the survey, were there any areas where the structure may be compromised by anything we do?

  Yes

  No

• Yes

  No