Title Page

  • Store/Site Name

  • Location
  • Type of Store

  • Conducted on

  • Prepared by

Cabinet Delivery / Removal

  • Take Pictures of the approach to store for the Delivery Vehicle.

  • Are there any restrictions for the delivery vehicle to gain access to site? (Artic lorry to large / Red Routes etc).

  • Take pictures of where the best place will be for the delivery vehicle to be parked up and able to unload and load.

  • Where will the cabinets enter the store/site? (please add more than one option if applicable).

  • Take Pictures of the Door ways leading leading onto the sales floor.

  • What are the dimensions of the outer lobby door way if applicable?

  • What are the dimensions of the inner looby door way if applicable or main entrance leading onto sales floor?

  • Is Matwell Protection Required.

  • Are there any height/width concerns? (Min height clearance required is 2200mm and width is 1300mm).

  • What works are to be carried out to gain the required clearance?

  • Are there any Bollards/Posts/Gates/Security barriers causing a concern? (Min width required 1300mm)

  • Take Pictures of the Door way leading leading onto the sales floor.

  • What are the dimensions of the door way?

  • Are there any height/width concerns? (Min height clearance required is 2200mm and width is 1300mm for a Metro and 2150mm height and 1000mm width for an Express).

  • What works are to be carried out to gain the required clearance?

  • Are there any Bollards/Posts/Gates/Security barriers causing a concern? (Min width required 1300mm)

  • Take Pictures of the Door ways leading leading onto the sales floor.

  • What are the dimensions of the door way?

  • Are there any height/width concerns? (Min height clearance required is 2200mm and width is 1300mm).

  • What works are to be carried out to gain the required clearance?

  • Are there any Bollards/Posts/Gates/Security barriers causing a concern? (Min width required 1300mm)

  • Take Pictures of all the Door ways leading leading onto the sales floor.

  • What are the dimensions of all the door ways leading to the sales floor from delivery point? Please refeence door ways with the respective measurements.

  • Are there any height/width concerns? (Min height clearance required is 2200mm and width is 1300mm).

  • What works are to be carried out to gain the required clearance?

  • Are there any Bollards/Posts/Gates/Security barriers causing a concern? (Min width required 1300mm)

  • Is Matwell Protection Required.

  • Are there any centre management to deal with with the delivery to this store?

  • After Speaking to the store manager, are there any delivery/noise restrictions for the route/routes we are proposing?

Existing Cabinets and Store Conditions

  • Does the store have existing Cold Air Retrieval? (Please look for ducting systems from above the existing chillers and also tops of cabinets being sealed up from a floor duct system).

  • Is the Store a TFT Site? (Two floor Trading).

  • Are there any columns within the cabinet islands that are positioned within the void of the island behind the cabinets? (If there is please document column width and depth on next section).

  • Does the exisitng cabinets have nightblinds?

  • Is there any evidence of HVAC / Store Temp Control Systems installed at this store?

  • Add Tab per existing Run or Island on the Sales Floor.
  • Run/Island Reference

  • What is the make up of cabinets for this run or island?

  • Take 3 pics for each cabinet (Pic 1 - Cabinet Frontal Picture, Pic 2 - Cabinet Serial/Manufacture Plate, Pic 3 - Tesco Asset Tag No).

  • Are there any Removal/Install Concerns (Column within Runs/Low Ceiling etc).

Petrol Forcourt

  • Does this store have an existing PFS with a shop?

  • Take pictures of where the best place will be for the delivery vehicle to be parked up and able to unload and load.

  • Is the ground/route to the shop flat from the delivery vehicle?

  • What works are to be carried out in order to gain flat/level access to the shop?

  • Take Pictures of the Internal & External of the PFS Doorway.

  • What is the front door width with the door installed?

  • What is the front door height with the door installled?

  • Any Concerns with the cabinets fitting through the front door? (Min Height required 2030mm and min width 800mm) If yes what works need to be carried out to gain the required height/width.

  • What is the make up of cabinets within the store? (Include cabinet depths and heights).

  • Take 3 pics for each cabinet (Pic 1 - Cabinet Frontal Picture, Pic 2 - Cabinet Serial/Manufacture Plate, Pic 3 - Tesco Asset Tag No).

  • Take a couple of pictures stood back to show cabinets positions

  • Are there any Removal/Install Concerns (Cabinet width/height).

  • Are the Exising Chillers Integral or Remote?

  • What is the existing power supply for these chillers?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.