The Standard Patent Glazing Co.Ltd. - Site survey report

• Audit Title

• ContactNo.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Introduction

• I attended site today to conduct a site survey to ascertain dimensions and interface detail for the proposed patent glazing system to the roof of:

Site conditions

• Is the structural opening ready to be surveyed

  Yes

  No

  N/A

• Is there safe access and egress to and from site

  Yes

  No

  N/A

• Is there a 110v power supply available

  Yes

  No

  N/A

• Are adequate welfare facilities available

  Yes

  No

  N/A

• Is task lighting required

  Yes

  No

  N/A

• Delivery vehicle most suited for this site

  No.1 motor

  No.3 motor

• Storage solutions available on site

  Internal storage available

  Secure external storage

  No storage available

Site dimensions

• I was able to identify the sizes required for our drawing office to issue a drawing for your approval

  Off

  On

• I wasn't able to take site dimensions today because:

  Off

  On

• The structure wasn't fully formed

  Off

  On

• It was unsafe to do so due to inadequate scaffolding arrangements

  Off

  On

• Upon site investigation we feel our system isn't suitable for this application

  Off

  On

• Roof plan

  Drawing

• Section through glazing

  Drawing

• Interface details

  Drawing

• Other

  Drawing

• Pitch of roof

• Site photographs

  Media

• Survey notes

Specification

• Glazing system

  Select Rafter line Skyline Skyline Box Traditional Heritage Skylight

  • Rafter line
  • Skyline
  • Skyline Box
  • Traditional
  • Heritage
  • Skylight

• Glazing bar

  Select SPG1 SPG2 SPG3 SPG4 SPG5 SPG7 SPG10 SPG15 BL4 BL6 BL7 Lead covered No.5 Lead covered No.7

  • SPG1
  • SPG2
  • SPG3
  • SPG4
  • SPG5
  • SPG7
  • SPG10
  • SPG15
  • BL4
  • BL6
  • BL7
  • Lead covered No.5
  • Lead covered No.7

• Cap

  Select PC1&2 PC1 w1 C4 C6 SC1&3 N/A

  • PC1&2
  • PC1
  • w1
  • C4
  • C6
  • SC1&3
  • N/A

• Finish

  Polyester powder

  Anodised

  Mill finish

• Colour and texture reference if specified

• Flashing specification

  aluminium

  Lead

  Dress only

• Infill type

  Single glazed

  double glazed

  triple glazed

  Polycarbonate

• Infill thickness

• Infill specification if known

• Vent type

  Top hung

  Side hung

  N/A

• No. of vents

• Vent gearing

  Mechanical

  Electrical

Existing scaffolding arrangements

• The existing scaffolding arrangements on site are adequate and will enable a successful installation

  Off

  On

• The existing scaffolding arrangements are not adequate and must be changed to suit our requirements. Failure to amend the scaffolding arrangements prior to our site installation visit could result in programme delays and cost implications.

  Off

  On

• The Standard Patent Glazing Co.Ltd. are supplying scaffolding

  Off

  On

Scaffolding requirements

• We require a fixed scaffold to the perimeter and underside of the structural opening to enable our installation team to fix the proposed glazing system. The height of the scaffold should be around 300mm below the bottom curb. Scaffolding structures must not protrude the glazing line.

  Off

  On

• We require mobile aluminium tower scaffolds to the perimeter and underside of the structural opening to enable our installation team to fix the proposed glazing system. The height of the scaffold should be around 300mm below the bottom curb. Scaffolding structures must not protrude the glazing line.

  Off

  On

• We require a fixed scaffold to the underside of the structural opening to enable our installation team to fix the proposed glazing system. The height of the scaffold should be around 300mm below the bottom curb. Scaffolding structures must not protrude the glazing line.

  Off

  On

• We require mobile aluminium tower scaffolds to the underside of the structural opening to enable our installation team to fix the proposed glazing system. The height of the scaffold should be around 300mm below the bottom curb. Scaffolding structures must not protrude the glazing line.

  Off

  On

• N/A

  Off

  On

• Other scaffolding requirements

Hoisting requirements

• Hoisting solution

  Select Mechanical goods hoist scissor lift tele-handler manual lift Telescopic boom

  • Mechanical goods hoist
  • scissor lift
  • tele-handler
  • manual lift
  • Telescopic boom

Lead-in times

• Drawings - Our current lead-in time for completion of approval drawings is

  Select 1 week 2 weeks 3 weeks 4 weeks 5 weeks 6 weeks 7 weeks 8 weeks 9 weeks 10 weeks 11 weeks 12 weeks 1 day 2 days 3 days

  • 1 week
  • 2 weeks
  • 3 weeks
  • 4 weeks
  • 5 weeks
  • 6 weeks
  • 7 weeks
  • 8 weeks
  • 9 weeks
  • 10 weeks
  • 11 weeks
  • 12 weeks
  • 1 day
  • 2 days
  • 3 days

• Manufacture(approval of drawings is required prior to the commencement of manufacture) - Our current lead-time for the manufacture of the proposed glazing system is

  Select 1 week 2 weeks 3 weeks 4 weeks 5 weeks 6 weeks 7 weeks 8 weeks 9 weeks 10 weeks 11 weeks 12 weeks 1 day 2 days 3 days

  • 1 week
  • 2 weeks
  • 3 weeks
  • 4 weeks
  • 5 weeks
  • 6 weeks
  • 7 weeks
  • 8 weeks
  • 9 weeks
  • 10 weeks
  • 11 weeks
  • 12 weeks
  • 1 day
  • 2 days
  • 3 days

• Installation - Weather permitting, installation will take upto

  Select 1 week 2 weeks 3 weeks 4 weeks 5 weeks 6 weeks 7 weeks 8 weeks 9 weeks 10 weeks 11 weeks 12 weeks 1 day 2 days 3 days

  • 1 week
  • 2 weeks
  • 3 weeks
  • 4 weeks
  • 5 weeks
  • 6 weeks
  • 7 weeks
  • 8 weeks
  • 9 weeks
  • 10 weeks
  • 11 weeks
  • 12 weeks
  • 1 day
  • 2 days
  • 3 days

Payment type

• A Pro-forma invoice was dispatched to your Company along with our order confirmation pack. The pro-forma invoice must be paid prior to our installation team attending site.

  Off

  On

• We have sufficient cover on your Company to enable payment upon completion of our installation. Payment specifications will be detailed in our invoice.

  Off

  On

• Conclusion

• I agree that the information recorded here is accurate representation of the site listed above.

  Yes

  No

  N/A

• Client signature

  Sign

• On behalf of The Standard Patent Glazing Co.Ltd.

  Sign