Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Inspections
-
Electrical inspections completed
-
Plumbing inspections completed
-
Framing inspections completed
-
Exterior insulation inspected
E2468 Conference
-
LCD monitor blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Shade pocket blocking completed
-
Switches are located correctly per 12/I401
-
Window mullion cap is in place and sealed
-
Sill stool trim is level and completed
E2466 Office
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
-
Sill stool trim is level and completed
E2456 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2454 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2452 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2450 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2458 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2460 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2462 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2955 Storage
E2464 Teaming area
-
LCD monitor blocking completed
-
Shade pocket blocking completed
-
Sill stool trim is level and completed
E2400 Open Office
-
Shade pocket blocking completed
-
Sill stool trim is level and completed
-
Outlets under FEC are centered
E2446 Service Center
E2448 Enclave
-
SF blocking completed plumb and fastened tight to stud.
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2942 Enclave
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back wall boxes within same stud space.
E2300 Open Office
-
Shade pocket blocking completed
-
Sill stool trim is level and completed
-
Outlets under FEC are centered
E2940 Conference
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at head & jambs.
-
Wall bumper blocking completed
-
TV mount blocking completed on East wall
-
Roughin boxes are located correctly per 14/I401
-
Wall mounted access panels in SE corner.
E2444 Office
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at east jamb.
-
Wall bumper blocking completed
-
Wall mounted access panels in East wall.
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2442 Office
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at West jamb.
-
Confirm wall framing was revised to flush out at column enclosure.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2440 Office
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at West jamb.
-
Confirm wall framing was revised to flush out at column enclosure.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2438 Office
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at East jamb.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2426 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2424 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2422 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2420 Enclave
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2418 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2416 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2414 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2412 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2410 Office
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2408 Closet
-
SF blocking completed plumb and fastened tight to stud.
-
Confirm framing at head is revised to match height of surrounding doors.
E2406 Interview
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2404 Interview
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2402 HR Entry
-
Confirm wall blocking above head screen wall
-
Outlets centered under FEC boxes (2)
E2430 Testing
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2432 Testing
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2434 Testing
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2436 Storage
-
Confirm sf head height matches surrounding heights
E2428 Video Conference
-
SF blocking completed plumb and fastened tight to stud.
-
TV mount blocking completed at South wall.
-
Wall bumper blocking completed
-
Roughin boxes are located correctly per 14/I401
E2920 Team Break
-
In wall Blocking completed at head and jamb of screen wall.
-
Wall blocking completed for millwork.
-
Confirm recessed PTC at millwork.
-
Confirm no roughin boxes along east GL wall.
-
If roughin completed to be in millwork confirm mud ring is adequate.
-
Confirm no outlet at GL wall above millwork
E2910 Project Room
-
Confirm plywood sheathing completed above partition wall.
-
Confirm additional steel support columns are installed at partition wall.
-
Confirm no roughin boxes along South GL wall.
-
Outlets centered under FEC box
E2230 Conference
-
SF blocking completed plumb and fastened tight to stud. In wall blocking at head.
-
Blocking completed along east wall for MBD-2 per 6/I400.
-
Switches are located correctly to fit between MB and door swing. See 5&6/I400.
E2860 Elec
-
Plywood sheathing completed along East wall.
E2865 Jan
-
Confirm blocking requirements.
E2870 IDF
E2835 Service Center
-
Outlets centered under FEC box (2)
E2840 Telepresence
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing).
-
Wall mounted access panels roughin completed along west wall (2).
E2825 Enclave
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2820 Enclave
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2815 Recycle
-
Confirm change in door swing has been corrected.
E2805 Storage
-
Confirm HM frame change was completed.
E2704 Teaming Area
-
Added steel posts completed in partition wall.
-
No plywood sheathing at partition head.
E2692 Conference
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
TV mount blocking completed at North wall per 4/I401
-
Wall bumper blocking completed
-
Switches are located correctly per 4/I401.
E2694 Office
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
Furniture blocking completed at North wall per I600.
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
-
Extension mullion completed with drywall cover and seal.
E2696 Office
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
Furniture blocking completed at North wall per I600.
-
Switches are located correctly (out of door swing). No back to back boxes within same wall cavity.
E2702 Conference
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
TV mount blocking completed at North wall per 2/I401
-
Wall bumper blocking completed
-
Switches are located correctly per 3/I401.
-
Extension mullion completed with drywall cover and seal.
E2700 Conference
-
Shade pocket blocking completed
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
Switches are located correctly per 1/I401.
-
TV mount blocking completed at North wall per 2/I401
E2105 Conference
-
SF blocking completed plumb and fastened tight to stud.
-
MBD-2 blocking completed at North wall per 9/I400
-
Switches are located correctly per 9/I400
E2110 Enclave
-
SF blocking completed plumb and fastened tight to stud.
-
Wall bumper blocking completed
-
TV mount blocking completed at North wall per 5/I401
-
Switches are located correctly per 5/I401.
-
East wall roughin boxes 1 5/8" - 1 7/8" mud rings to accommodate wd panels.
E2100 Open Office
-
Shade pocket blocking completed
-
Outlets centered under FEC box
E2600 Open Office
-
Shade pocket blocking completed
-
Outlets centered under FEC box
E2850 Women's
-
Toilet partition blocking completed
-
Grab bar blocking complete at hc stall
-
Full height mirror blocking completed
-
Steel tubes at counters completed.
-
Recessed TSC completed.
-
Recessed PTC completed (2).
-
Recessed SNC completed
-
AOD roughin completed.
E2845 Men's
-
Toilet partition blocking completed
-
Grab bar blocking complete at hc stall
-
Full height mirror blocking completed
-
Steel tubes at counters completed.
-
Recessed TSC completed.
-
Recessed PTC completed (2).
-
AOD roughin completed.
E2856 Alcove
-
Fountain blocking completed.
E2810 Service Elevator
E2900 Elevator Lobby
-
Glazing head completed (blocking may be required).
-
MAG holder blocking and roughin completed.