Information
-
Large wrapping machine.
-
Conducted on
-
By
-
Photo required.
-
Isolate machine by removal of 13 amp plug.
Control panel
-
Check mains cable for damage
-
Check control panel for damage.
-
Check tightness of electrical connections.
-
Check condition of pendant control cable, pendant control box and controls.
-
Open pendant control and check connections and cables.
Drive end.
-
Check Motor cable.
-
Remove motor terminal box cover and check all connections.
-
Check drive chain and sprockets for wear and tension.
-
Check taper bushes are tight.
-
Check condition of snubber clamp..
-
Check motor and gearbox fixings.
-
Check frame for damage.
-
Check wheels for damage / excessive wear.
-
Power up and check operation of speed control and brake.
DC Winch.
-
Check condition of controls and cable.
-
Check battery condition and connections.
-
Check battery distilled water level.
-
Check winch for damage.<br><br><br>
-
Check condition of rope.<br><br><br>
-
Check condition of hook.<br><br><br>
-
Check pulling point is in good order.<br><br><br>
Tail stock
-
Check bearings for wear.
-
Check shaft for damage.
-
Check wheels for damage / excessive wear.
-
Check rails for damage.