-
Document No.
Electrical Inspection Report
-
Date
-
Customer Name
-
Address
-
COES No
-
Meter No
-
Inspection in response to:
-
Items detailed below require:
-
Defect Notice forwarded to:
-
Inspection of the electrical wiring and/or equipment detailed above revealed that the following items are in need of attention to ensure the safety and compliance of the electrical installation.
Please note that Section 43 of the Electricity Safety Act 1998 imposes an obligation on the occupier of any premises in which there is unsafe wiring or equipment, to cause that wiring or equipment to be removed or made safe, or to notify the owner of the premises who then has a corresponding obligation. Substantial penalties may apply for failure to comply with the Act.
A suitably qualified electrical worker should be engaged to attend to these items as soon as practicable.
Details and Reference
-
Details
-
Note: The items detailed above were identified during an inspection of the wiring or equipment on the date indicated. The inspection involved visual examination and application of electrical tests to ascertain the suitability of the apparatus and/or wiring for normal use. With many components inaccessible, inspection and testing of the electrical installation is necessarily limited in scope and it is not implied that other wiring or equipment is free of defects.
-
Report prepared for TechSafe Australia Pty Ltd by:
-
Licensed electrical Inspector No:
-
Techsafe Australia Pty Ltd
PO Box 33 Glen Waverley Vic 3150
(03) 8558 0100
Email: techsafe@techsafe.com.au
www.techsafe.com.au
Appendix
-
Add media