Ventia safety - Low Capacity SPS Project - Pump Optimization (Phase 2)

• The version control will be maintained by the SHEQ team and is controlled via the Safety Equipment Inspections Document 2073838157-15.

• Station No

• Station No

• Document No.

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

The version control will be maintained by the SHEQ team and is controlled via the Safety Equipment Inspections Document 2073838157-15.

Pump Foot Step Bend Arrangement / Snor Level

• Inspected?

  Yes

  No

  N/A

• Height to the Snor level from the bottom of the floor (mm) (Show on the sketch))

• Draw sketch of well

  Drawing

• Any Specific Observations / Comments

Suction Safety Level

• Adjusted During Project?

  Yes

  No

  N/A

• Commissioned Trip Point - Unit 1

• Commissioned Trip Point - Unit 2

Pump 1

• Running Current

• Snor Current

Pump 2

• Running Current

• Snor Current

• Comments

Station Pumping Duty Set Up

Commissioned Duties (A)

• Duty Cut In

• Duty Cut Out

Commissioned Duties (B)

• Duty Cut In

• Duty Cut Out

• Comments

Flush Valve (Record Information if not completed during Phase 1)

• Flush Valve Present?

  Yes

  No

  N/A

• Inspected?

  Yes

  No

  N/A

• Time flush valve remained open (Seconds)

• Does it function properly?

  Yes

  No

  N/A

• Any Specific Observations / Comments

Pressure Gauging

• If all pressures were recorded on initial inspection please indicate below

• Pressure Gauged?

  Yes

  No

  N/A

• Were all pressures recorded on initial inspection?

  Yes

  No

  N/A

• If 'Yes', disregard the following.

When Unit 1 Running

• Pressure at rising main (down stream side of reflux valve) for single unit running

• Pressure at discharge pipe work (pump side of reflux valve) for single unit running

When Unit 2 Running

• Pressure at rising main (down stream side of reflux valve) for single unit running

• Pressure at discharge pipe work (pump side of reflux valve) for single unit running

When Both Units Running

• Pressure at rising main (down stream side of reflux valve on common rising main) for both units running

• Unit 1 - Pressure at rising main (down stream side of reflux valve) for both units running

• Unit 2 - Pressure at discharge pipe work (pump side of reflux valve) for both units running

Additional Information

• Any other Observations / Comments / Defects

• Take multiple photos (if required)

  Media

• Sign

  Sign