Title Page
-
Site Name
-
Flat Number
-
Conducted on
-
Prepared by
-
Location
Post Inspection
-
Have all the remedial works contained within the pre inspection been completed ?
-
What works are still required ?
-
What is required to complete outstanding works ?
-
Is the installation to an LD1 D1 standard ? (Detector in all rooms, cupboards larger that 1m² and areas of high risk excluding bathrooms. Detection also has a tamper proof 10 year lithium battery.)
-
How many existing smoke/heat detectors have been retained ?
-
How many smokes have been installed ?
-
Location
-
By ticking yes you verify that a suitable electrical certificate has been completed and will be issued
-
How many heats have been installed ?
-
Location
-
By ticking yes you verify that a suitable electrical certificate has been completed and will be issued
-
How many smokes have been replaced ?
-
Location
-
By ticking yes you verify that a suitable electrical certificate has been completed and will be issued
-
How many heats have been replaced ?
-
Location
-
By ticking yes you verify that a suitable electrical certificate has been completed and will be issued
-
How many RF modules to ensure interlink between devices have been fitted ?
-
Has a relay base been installed or replaced ?
- Installed
- Replaced
- Retained Existing
- Not required (Ei414 relay switch existing)
-
By ticking yes you confirm you have tested all devices activate the Ei414 switch whilst in test mode and also that you have returned the switch to the 'ON' position.
-
By ticking yes you verify and confirm that the relay base connection is in a 'Normally Closed' state and matches with the settings at the Living Hub ?
-
Has a new cable been installed from the relay base and connected to the Living Hub ?
-
Has an Aico Ei450 Test switch been installed or replaced ?
-
By ticking yes you confirm and verify that all devices have been correctly 'House Coded' and that all devices are correctly associated with the individual property
-
Is the Living Hub healthy and functional ?
-
Was this tablet installed new, replaced or retained ?
-
Is there a pullcord in the bathroom and functioning correctly?
-
Have you installed this or is it existing ?
-
Is it wired or wireless ?
-
Has all redundant equipment been removed and made good as per the specification?
-
Was there any obsolete equipment to remove ?
-
Reason for not making good ?
-
How many redundant pull cords have you removed and made good ?
-
Have you had confirmation that the fire detection system and pullcord both activate the hub and contact with Appello has been achieved ?
-
What is required to achieve satisfactory operation ?
-
By ticking yes you verify that you have left the property in a clean and tidy condition and that no materials or debris created as a result of our works has been left behind.
-
Have any works additional to the above questions taken place ?
-
What additional works have been carried out ?
-
Do you have any further comments or recommendations ?
-
Please record and add testing process (up to 3mins)
-
Test call answered after 3 minutes
-
Resident Use Only: Have you checked your property and are you happy that it has been left in a clean condition with no damages ?
-
What is your issue ?
-
Name
-
Signature
Sign Off
-
Engineers Name
-
Signature
