Warming Cabinet Post Installation Quality Inspection

• Location
  Address

• Conducted on

  Date

• Prepared by

• Visual Inspection of Unit for Fit and Finish of Installation

  Pass

  Fail

  N/A

• Take Photos from multiple angels on both load and unload side

  Pass

  Fail

  N/A

• Is there damage to the unit? If Yes, provide pictures of damage

  Pass

  Fail

  N/A

• Assign responsible person to follow up and repair/replace damaged components

  Pass

  Fail

  N/A

• Unit(s) Placed per drawings

  Pass

  Fail

  N/A

• Unit(s) Leveled

  Pass

  Fail

  N/A

• Seismic Anchoring executed as required

  Pass

  Fail

  N/A

• Inspect door(s) for proper alighment, no binding during open or close, Latch adjusted

  Pass

  Fail

  N/A

Utilities

• Verify electrical connection is correct and power cord is routed properly

  Pass

  Fail

  N/A

• Ensure Exhaust is connected properly (for units with Vent Hood)

  Pass

  Fail

  N/A

• Verify HEPA and Pre-filter are installed

  Pass

  Fail

  N/A

Inspect Panels, Trim and enclosure installation for completeness, fit, and finish

• All components installed properly

  Pass

  Fail

  N/A

• All Panels and Trim installed

  Pass

  Fail

  N/A

Final Acceptance

• All Surfaces Cleaned and/or Polished

  Pass

  Fail

  N/A

• Verify Temperature/Set Point for each Chamber

  Pass

  Fail

  N/A

• Verify audible/visual over-temp alarm

  Pass

  Fail

  N/A

• Verify temperature recorder is operating

  Pass

  Fail

  N/A

• Install Meets Belimed Standards

  Pass

  Fail

  N/A

• Add any general inspection comments

• Signature (provide First Name, Last Name, Position

  Sign