Title Page
-
Conducted on
-
Prepared by
-
Location
-
Check thermostat for temperature and compare with handheld thermometer - are the readings the same of =/- 0.5 degrees?
-
Reset the thermostat and wait a few minutes to see if the temperature rectifies.
-
If the temperature does not correct log service call
-
Is the area around the refrigeration units and/or compressor units clear from combustible materials and other debris?
-
Remove any built up debris and combustible material from around refrigeration and compressor units
-
Are the condensing and evaporator coils clean and free from dust and other built up materials?
-
Clean condensing and evaporator coils and remove any built up materials
-
Are fan blades free of dust and other built up debris (including fan screens)?
-
Clean fan blades and screens
-
Are evaporator fans within cool rooms and refrigeration units free of stored materials providing complete airflow to the front and rear?
-
Rearrange storage to ensure evaporator fans are clear with full airflow to the front and rear
-
Check any coolant levels
-
Are coolant levels OK?
-
Are all hinges, latches and seals in working order providing a well sealed environment?
-
Log service call to adjust and latches/hinges and/or replace seals on fridges.
-
Is there any exposed Insulated Panel Core (EPS) within cool rooms caused by unsealed service penetrations, delamination or panel damage?
-
Log service call to have exposed EPS sealed as soon as practical