Information
-
Building
-
Add media
-
Number of floors
-
Function
-
Date of audit
-
Audited by
SIGNAGE
SIGNAGE
-
Areas intended for the use of people with disabilities are clearly marked with the international symbol of access.
-
Where the international symbol of access displayed at?
- Entrance
- Toilet
- Parking
- Lift
-
International symbol of access has a minimum height of 110mm and with the wheelchair user symbol facing to the right.
-
Height of lettering at least 50mm or legible from a distance of 15m.
-
All signage are consistent, clear, visible and legible.
-
Is the tactile door signage installed at the handle side of the door between 1400-1700mm from the floor surface?
-
Is the door signage gel embossed with room letter at the top and room numbers at the bottom?
-
Signage of electronic aids to assist hearing-impaired people are displayed in venues and at entrances.
-
Signage has sufficient colour contrast to make the signage clearly legible.
-
Overhead signage have a height clearance of at least 2.1m.
-
Wall mounted signage for the purpose of information located between 1400-1700mm from the floor surface.
PARKING
PARKING
-
No. of designated parking bays.
-
Is there at least one designated parking bay in employee parking area?
-
At least one designated bay per 25 parking spaces in an area of 50 or more parking bays.
-
Is the parking bay at least 3500x5000mm in dimensions?
-
Is the shared space at least 1m in width between two standard bays?
-
Is the parking bay within 50m of the accessible entrance?
-
1000x1000mm International symbol of access clearly demarcated in safety yellow on the floor.
-
Height clearance of 2.4m at entrance/exits and throughout parking area.
-
Vertical signage provided with international symbol of access positioned at least 2m in height from finish floor level.
-
Is there a level access/ drop-kerb from the parking bay to the accessible route/ pavement?
EXTERNAL CIRCULATION
EXTERNAL ENVIRONMENT
-
At least one accessible route is provided within the site from public transport nodes, parking, public streets and pavements.
-
Raised crossing or painted zebra-crossing provided?
-
Is the building accessible at least on the ground floor?
-
Accessible route of travel is at least 900mm in width or ideally at 1500mm in width.
-
No revolving doors, revolving gates or turnstile installed at the entrance to the facilities.
-
Is there an alternative entrance at least 900mm wide with a nib of 450mm?
-
Access control system is positioned at 1m above finish floor level.
-
Doors and windows along the route do not present as obstacles?
-
Are security gates secured to the wall when opened.
-
All overhead obstacles are at least 2m above the floor surface.
-
Any wall mounted fittings or obstacles along the route that are easily visible and contrasting in colour?
-
Is the wall mount fittings and obstacles (dustbins, fire equipment etc) shielded or recessed to prevent injuries?
-
No drainage channels or gratings located in pedestrian areas and path of travel.
-
No openings in the floor exceeding 13mm in width and perpendicular to the direction of travel?
-
Floor chambered at 1:50 slope or 1.1° gradient.
-
Pause areas with suitable seating are provided at 25m intervals.
INTERNAL CIRCULATION
INTERNAL CIRCULATION
-
Well lit reception area, information point or help desk are provided near the primary entrance/ exit of the building or faculty.
-
Recommended lighting at 250lux. Current light reading (lux):
-
Recommended sound pressure level at 35-50 dBA. Current sound reading (dBA):
-
Is the building accessible at least on the ground floor?
-
Accessible route at least 900mm in width or ideally at 1500mm in width.
-
No revolving doors, revolving gates or turnstile installed at the entrance to facilities?
-
Is there an alternative entrance at least 900mm wide with a nib of 450mm?
-
Access control system is positioned at 1m above finish floor level?
-
Doors and windows along the route do not present as obstacles?
-
Are security gates secured to the wall when opened.
-
Any wall mounted fittings or obstacles along the route that are easily visible and contrasting in colour?
-
Is the wall mount fittings and obstacles (dustbins, fire equipement etc) shielded or recessed to prevent injuries?
-
No opening in the floor exceeding 13mm in width and perpendicular to the direction of travel?
-
Pause areas with suitable seating are provided at 25m intervals.
FLOOR SURFACES
FLOOR
-
Floor surface are stable, firm and slip resistant.
-
Carpet pile are less than 3mm.
-
No opening in the floor exceeding 13mm in width and perpendicular to the direction of travel?
-
Change in level between floor surfaces or thresholds are less than 5mm.
-
No cobbles or gravels or loose finishes form part of the accessible route.
-
Change in floor level exceeding 600mm fitted with a balustrade.
ENTRANCES & DOORS
ENTRANCES
-
No. of entrances to the building.
-
No. of accessible entrances.
-
Clear opening width is at least 850mm.
-
Door swing clear of at least 1500x1500mm
-
Closing mechanism allows sufficient time for users to pass through the door.
-
No revolving doors, revolving gates or turnstiles installed at the entrance or along the route?
-
Is there an alternative entrance at least 900mm wide with a nib of 450mm?
-
Access control system is positioned at 1m above finish floor level.
-
Type of door handle in use.
-
Handle positioned at 1000mm above the finish floor
-
Lever door handles at 150mm in length and at 1m in height above floor.
-
Nib of at least 450mm at handle side of the door.
DOORS
-
Please add a door if multiple door standards are used in a building.
Door
-
Clear opening width is at least 850mm including one opening leaf of a double door.
-
Door swing clear of at least 1500x1500mm
-
Closing mechanism allows sufficient time for users to pass through the door.
-
Nib of at least 450mm at handle side of the door.
-
Type of door handle in use.
-
Handle positioned at 1000mm above the finish floor
-
Lever door handles at 150mm in length and at 1000mm in height above the finish floor level.
RAMP
RAMPS
-
No. of internal ramps in buildings.
-
No. of external ramps around the buildings.
-
Please add a ramp.
Ramp
-
Ramps located in a convenient locations?
-
Gradient of the ramp is at 1:12 or 5° and 6m in length between landings.
-
Minimum width of ramp is 1100mm.
-
Minimum length of landings at 1200 mm
-
Ø35-50mm handrails at 1m in height on both side of the ramp and continuous between landings.
-
Clear width of 60mm between handrails and wall surface.
-
Handrails extend 300mm at top and bottom of the ramp and return to the supporting structure or finish in a positive return.
-
Handrails are supported centrally from below with a mounting not less than 50mm long.
-
Central handrail is provided at an interval of 2400mm where ramp exceed 2400mm in width.
-
Ramp with a rise exceeding 600mm high have a skirting of 75-300mm to protect users from the edge of the raised surface.
-
Floor surface are stable, firm and slip resistant.
-
Warning tactile guidance provided in accordance with SANS784.
STAIRCASES
STAIRCASES
-
No. of stairwells in the building.
-
No. of spiral staircases in the building.
-
No. of outdoor staircases around the buildings.
-
Please add an outdoor staircase
Outdoor staircase
-
Width of the staircase at least 900mm in width.
-
Length of landing min 1100mm in length.
-
Risers are consistent and not exceeding 170mm in height.
-
Solid risers.
-
No winders are used along the staircase.
-
Min 40mm contrasting nosing along the width of the tread.
-
Ø35-50mm handrails at 1m in height on both side of the staircases and continuous between landings.
-
Clear width of 60mm between handrails and wall surface.
-
Handrails extend 300mm at top and bottom of the staircase and return to the supporting structure or finish in a positive return.
-
Handrails are supported centrally from below with a mounting not less than 50mm long.
-
Central handrail is provided at an interval of 2400mm where the staircase exceed 2400mm in width.
-
Floor surface are stable, firm and slip resistant.
-
Warning tactile guidance provided in accordance with SANS784.
-
Please add an Indoor staircase.
Indoor staircase
-
Width of the staircase at least 900mm in width.
-
Length of landing min 1100mm in length.
-
Risers are consistent and not exceeding 170mm in height.
-
Solid risers.
-
No winders are used along the staircase.
-
Min 40mm contrasting nosing along the width of the tread.
-
Ø35-50mm handrails at 1m in height on both side of the staircases and continuous between landings.
-
Clear width of 60mm between handrails and wall surface.
-
Handrails extend 300mm at top and bottom of the staircase and return to the supporting structure or finish in a positive return.
-
Handrails are supported centrally from below with a mounting not less than 50mm long.
-
Central handrail is provided at an interval of 2400mm where the staircase exceed 2400mm in width.
-
Floor surface are stable, firm and slip resistant.
-
Warning tactile guidance provided in accordance with SANS784.
LIFTS
LIFTS
-
Number of lifts in building.
-
If no lifts are provided in the building is there a platform stair-lift or chair stair-lift installed?
-
Please add a lift if multiple lifts are used in a building.
Lift
-
Elevators serve all the floors that are accessible by stair access.
-
Lift cars have a minimum internal dimensions of 1100x1400mm.
-
Lifts doors have a clear opening width of at least 800mm.
-
Horizontal handrails fitted on all sides at 850-1000mm at a height of 850-1000mm above the floor.
-
Mirror fitted on the top half of the rear wall equal to the width of the lift.
-
Unobstructed space of at least 1.5x1.5m at the entrance of the lift on each floor.
-
Audible and visible warning in the lift lobby and car indicating approach, arrival, door opening/closing, the floor level requested and at which the floor the lift stops.
-
Internal and external control buttons at 900-1200mm above floor level.
-
External and internal controls have tactile identification (raised numbers on the button or Braille to the right of the buttons) and are contrasting in colour.
-
Light level at lift controls at minimum 150lux.
-
Lift stop at level with the landing on each floor.
AUDITORIUM
AUDITORIUM
-
No. of auditoriums/ lecture venues with fixed seating in the building.
-
No. of auditoriums/ lecture venues with flexible seating in the building.
-
No. of laboratories/ studios in the building.
-
Please add an auditorium, tutorial room or lecture venue.
Auditorium
-
In an auditorium with fixed seating, a minimum one designated spaces per 50 seats or two designated spaces per 50-400 seats or 0.5% of over 400 seats is provided.
-
Designated spaces for wheelchair users are positioned adjacent or close proximity to an exit door.
-
A companion seat is provided for each designated space.
-
Designated spaces are minimum 900x1400mm in dimension with clear line of sight.
-
Desks have leg clearance of minimum 700mm to the underside and with a knee recess of 800mm width & 635mm depth.
-
Lighting level satisfactory in the auditorium at minimum 150lux when fully on.
-
Recommended sound pressure level at 30 dBA. Current sound reading (dBA):
-
Electronic aids installed for people with hearing loss and indicated with clear, suitable signage.
CONTROLS & SWITCHES
CONTROLS & SWITCHES
-
All light switches and security controls positioned at 1m above finish floor level.
-
Access control system are positioned at 1m above finish floor level.
-
Type of switch used.
-
Power outlets or power skirting positioned at least 500mm from finish floor level and at least 450mm away from corners.
-
Power outlets or power skirting position 150mm above working surfaces and at least 450mm from corners.
WARNING SIGNALS
WARNING SIGNALS
-
Emergency control in form of break glass units positioned at 1m above finish floor level.
-
Emergency warning system included visible strobe light to warn hearing-impaired people.
-
All emergency warning signals such as smoke detectors, fire alarms and evacuation signals are demonstrated both visually and audibly.
-
All fire controls and fire hydrants are located below 1200mm from the finish floor level and shielded/recessed to prevent injuries.
LIGHTING & ACOUSTIC
LIGHTING & ACOUSTIC
-
Lighting controlled by passive infrared sensors provided in external circulation areas, internal circulation areas, and bathrooms, where these facilities are used after dark. Where passive infrared sensors cannot be provided, night lights are provided.
-
Internal spaces have appropriate acoustic protection to prevent unwanted noises and reverberations.
-
Recommended sound pressure level in corridor and passage at 35 dBA. Current sound reading (dBA):
-
Recommended sound pressure level in offices, studios at 35 dBA. Current sound reading (dBA):
KITCHEN
KITCHEN
-
Please add a kitchen.
Kitchen
-
Area/ Department/ Room number:
-
Minimum Ø1500mm wheelchair turning space provided in kitchen area.
-
Worktops positioned at 710-800mm above the floor.
-
Worktops have leg clearance of minimum 700mm to the underside and with a knee recess of 800mm width & 635mm depth.
-
Kitchen sink with maximum depth of 150mm installed with 800x635mm leg clearance to the underside.
-
Single lever mixer tap with a lever handle at least 100mm long and within reach of any wheelchair user.
-
Hob/ stove installed with 800x600mm leg clearance to the underside and with a knee recess of 650mm.
-
Food preparation area provided next to cooking area.
-
Microwave/ oven ideally positioned on worktops or at 740mm height above the floor.
-
Bar fridge or single fridge with maximum height of 1200mm provided.
-
Shelving at 1000-1200mm height.
-
Sufficient colour contrast between worktops and other areas for persons with visual impairments.
-
Lighting level satisfactory in the kitchen at 150lux.
BEDROOM
BEDROOM
-
Please add a bedroom.
Bedroom
-
Area/ Department/ Room number:
-
Minimum Ø1500mm wheelchair turning space provided in bedroom.
-
Study desks have leg clearance of minimum 700mm to the underside and with a knee recess of 800mm width & 635mm depth.
-
Shelving at 1000-1200mm height.
-
Top of the mattress at 480-500mm above the floor to allow for ease of transfer between the bed and wheelchair.
-
Mattress is firm and fitted with memory foam to support spinal posture.
-
Bedside table is provided next to the bed.
-
Cupboards/ closets should be designed with shelvings, drawers and rails at minimum 400 to maximum 1200mm height from the floor level.
-
Cupboard door handles must be at least 150mm in length and at 1m in height above floor.
ACCESSIBLE TOILET
ACCESSIBLE TOILET
-
No. of accessible toilet in building.
-
Is the building zoned as residential?
-
In building of occupancy class H1 (residential) where bedrooms are provided with private bathrooms, at least one bedroom per 25 is provided with an accessible bathroom.
-
In building of occupancy class H1 (residential) where bedrooms are NOT provided with bathrooms, at least one accessible toilet per 25 bedrooms and one accessible bathroom is provided on each floor level.
-
At least one accessible toilet at each toilet cluster
-
Do people with disabilities travel less than 45m vertically and 25m horizontally to reach accessible toilets?
-
Please add an accessible toilet (identical toilets should be audited once).
Accessible Toilet
-
Area/ Department/ Room number:
-
International symbol of access is displayed on the door?
-
Door opens outwards with a clear space of 1.5x1.5m space outside the door.
-
Door opens inwards with an internal clear space of 1.2m dia clear of fittings including the door swing.
-
Door have a clear opening width of at least 900mm.
-
Door fitted with a suitable locking mechanism indicating occupancy and that can be open from the outside in case of emergency.
-
Door fitted with a kick plate on the inside and outside.
-
300mm long, Ø25mm vertical grab rail installed on the inside of the door at 1m height from the floor finish to the top of the rail and 300mm away from the hinged side.
-
300mm long, Ø25mm horizontal grab rail installed on the outside of the door at 1m height from the floor finish and 300mm away from the opening side of the door.
-
Minimum internal dimension of compartment is at least 1.8x1.8m
-
Centreline of toilet positioned at 450-500mm from nearest side wall.
-
Front end of the toilet is not less than 690mm from the rear wall.
-
Top of toilet seat positioned at 480-500mm above finish floor level.
-
Ø32-38mm cranked grab rail installed on the adjacent wall to the toilet at 740mm above finish floor level and 380mm from rear wall. Crank grab rail is 300mm horizontally, 300mm at 45° upwards and 300mm vertically.
-
Ø32-38mm horizontal grab rail installed at the back of the toilet at 740mm above finish floor level with its centreline meeting the centreline of the toilet.
-
Sanitary fixtures and fitting are located at 900-1200mm above finish floor level.
-
Soap dispenser, hand-drier, mirror, coat hook, vanity shelf and toilet paper holder provided in the accessible toilet.
-
Push pad or lever extension to the flushing control used?
-
Push Pad located at 900-1200mm to the top of the unit above the finish floor level.
-
150mm lever extension to the flushing control positioned on the outer side, on top of or behind the toilet, operable from the transfer side and easy to use.
-
Washbasin mounted without pedestal or legs at a height of 820mm or less from the finish floor level.
-
Washbasin have a vertical clearance of 650mm from under the basin to the floor measured at a point not less than 160mm from the front of and underside of the basin.
-
Vanity shelf installed at level with the washbasin with a clear underside height of 750mm above the finish floor level.
-
Optional hinged support arm installed at the transfer side of the toilet at 300mm from the centre of the toilet and at 740mm above finish floor level .
-
What type of tap installed at the washbasin?
-
Single lever mixer tap with a lever handle at least 100mm long and within reach of any person sitting on the toilet.
-
Floor surface in toilet and bathroom are stable, firm and slip-resistant under wet and dry conditions.
SHOWER
SHOWER
-
Please add a shower cubicle
Shower cubicle
-
Area/ Department/ Room number:
-
Shower cubicle is designed without a kerb or level change to allow a wheelchair user to roll into such cubicle.
-
International symbol of access is displayed on the door?
-
Door opens outwards with a clear space of 1.5x1.5m space outside the door.
-
Door opens inwards with an internal clear space of 1.2m dia clear of fittings including the door swing.
-
Door have a clear opening width of at least 900mm.
-
Door fitted with a suitable locking mechanism indicating occupancy and that can be open from the outside in case of emergency.
-
Door fitted with a kick plate on the inside and outside.
-
300mm long, Ø25mm vertical grab rail installed on the inside of the door at 1m height from the floor finish to the top of the rail and 300mm away from the hinged side.
-
300mm long, Ø25mm horizontal grab rail installed on the outside of the door at 1m height from the floor finish and 300mm away from the opening side of the door.
-
Centreline of collapsible shower seat positioned at 500mm from nearest side wall.
-
Collapsible shower seat is at least 460x480mm.
-
Top of shower seat is positioned at 500mm above finish floor level.
-
Optional hinged support arm installed at the transfer side of the shower seat at 320mm from the centre of the shower seat and at 740mm above finish floor level.
-
Ø32-38mm cranked grab rail installed on the adjacent wall to the shower seat at 740mm above finish floor level and 380mm from rear wall. Crank grab rail is 300mm horizontally, 300mm at 45° upwards and 300mm vertically.
-
Hand shower and shower rail fitting located at 1000mm above finish floor level and within reach of any person sitting on the shower seat.
-
Single lever mixer tap with a lever handle at least 100mm long and within reach of any person sitting on the shower seat.
-
Suitable 1000x1200mm shower curtain provided with railing mounted at 2100mm above finish floor level.
-
Coat hook located at 1000mm above finish floor level and 1210mm from rear wall.
-
Floor of compartment sloped at 1:80 to designated shower drain.
-
Floor surface are stable, firm and slip-resistant under wet and dry conditions.
-
Area/ Department/ Room number:
BATH TUB
BATH TUB
-
Please add a bath tub.
Bath tub
-
Area/ Department/ Room number:
-
Bath tub is at least 700x1700mm with a flat slip-resisant base.
-
Rim of the bath is at 480mm above the finish floor level.
-
Single lever mixer tap with a lever handle at least 100mm long and within reach of any person sitting in the bath tub.
-
Hand shower and bath mixer fitting located within reach of any person sitting in the bath tub
-
1200x800x90mm T-grab bar located at 580mm above finish floor level and 500mm from nearest side wall.
-
Area/ Department/ Room number: