Information
-
Document No.
-
General Contractor / Client
-
Job Name & Number
-
Conducted on
-
Prepared by
-
Location / Address
-
Personnel
-
Subcontractors On Site
JOB INFORMATION
-
Safety Book?
-
Tool box safety talks?
-
SDS Book?
-
Work areas properly signed and barricaded?
-
Water available?
HOUSEKEEPING
-
Work areas neat?
-
Waste containers provided and used?
-
Passageways and walkways clear?
-
Cords and leads safe?
FIRE PREVENTION
-
Adequate fire extinguishers, checked and accessible?
-
Hot Work Permit Filed?
-
"No Smoking" posted and enforced near flammables?
ELECTRICAL
-
Extension wires with bare wires or missing ground prongs taken out of service?
-
Ground fault interrupters being used?
-
Terminal boxes equipped with required covers?
HAND, POWER & POWDER ACTUATED TOOLS
-
Hand tools inspected regularly?
-
Guards in place on tools?
-
Correct tool being used for job at hand?
-
Power tools and cords inspected daily?
-
Powder actuated tools cleaned and inspected regularly?
-
Operators of powder actuated tools licensed?
FALL PROTECTION
-
Safety rails and cables secured properly?
-
Safety harnesses inspected and worn properly?
-
Employees exposed to fall hazards tied off?
-
Employees below protected from falling objects?
LADDERS
-
Extension Ladders extended at least 36" above landing?
-
Extension Ladders are secure to prevent slipping, sliding or falling?
-
Ladders inspected daily?
-
Stepladders used in fully open position?
-
No step at top two rungs of stepladder?
SCAFFOLDING
-
All scaffolding inspected daily?
-
Erected on sound rigid footing?
-
Tied to structure as required?
-
Guardrails, intermediate rails, toe boards and screens in place as required?
-
Planking is sound and sturdy?
-
Proper access provided?
-
Employees below protected from falling objects?
FLOOR & WALL OPENINGS
-
All floor openings securely covered or barricaded?
-
Perimeter protection in place?
-
Deck planks secure?
-
Materials stored away from edge?
TRENCHES, EXCAVATION & SHORING
-
Competent person identified and present?
-
Excavations are shored and sloped back?
-
Materials are stored at least 2' away from trench?
-
Ladders provided every 25' in trench?
-
Equipment is at a safe distance from edge of trench or excavation?
MATERIAL HANDLING
-
Materials properly stored or stacked?
-
Employees using proper lifting techniques?
-
Tag lines used to guide loads?
-
Proper number of workers for each operation?
WELDING AND BURNING
-
Gas cylinders stored upright?
-
Proper separating distances between fuels & oxygen?
-
Goggles or shields used?
-
Fire extinguishers readily available?
-
Hoses in good condition?
CRANES
-
Outriggers extended and swing radius barricade in place?
-
Operator is familiar with load charts?
-
Hand signal charts on crane?
-
Crane operator logs up to date?
-
Employees kept from under suspended loads?
-
Chains and slings inspected and tagged as required?
PERSONAL PROTECTIVE EQUIPMENT
-
Hard hats being worn?
-
Safety glasses being worn?
-
Respirators used when required? Proper respirator documentation available?
-
Hearing protection being worn when required?
-
Traffic vests or high visibility clothing material being worn?
Arc Flash Gear
-
Jump Suit available and inspected?
-
Arc Gloves available and inspected?
-
Arc Helmet and sock available and inspected?
Company Vehicle
-
Oil life ok?
-
Tire tread and pressure ok?
-
Windshield and mirrors in good condition?
-
Pucks and Locks in use?
-
License Plate Registration / Sticker current?
-
Class-D Safety Lane sticker current?
-
Are all tools and ladders belonging to your vehicle in good condition?
SUBCONTRACTOR'S
-
Westside Mechanical's Subcontractors working Safe?
SIGNATURES
-
Foreman Signatur