Title Page

  • OPERATOR

  • Rig Name and Number

  • Prepared by

  • Location

Tank

  • Check all welds

  • Inspect muffler, ensure no fluid inside.

  • Inspect Knock out tank, murphy switch

  • inspect sight glass and seal on knock out tank. Provide Photo

  • Check oil tank level;.

  • Inspect Fluid level indicator and function test.

  • Inspect all hatches, ensure that hatch bolt are in place and tighten. Provide Photos

Vacuum pump

  • Function test vacuum and discharge valve

  • Inspect oil pump and lines.

  • Inspect filter. Provide Photos

  • Check oil tank level

  • Ensure all bolts are in place.

Electrical

  • Ensure that starter box has all bots in place, Provide Photos

  • Inspect all cable glands, receptacles and plugs, Provide Photos

  • inspect cable for wear, cuts and flat spots.

  • Ensure that cable is off the ground.

  • Inspect 30Hp Motor, wire and Glands

Installation

  • Vacuum skid grounded, Provide Photos

  • Main power wire off the ground. Provide Photos

  • Provide Photos of Vacuum installation.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.