Centrifuge Maintenance

• OPERATOR

  Select AERION SHOP LAREDO ENERGY CHK XTO JAVELIN GRIT EOG ENDEAVOR LEWIS ENERGY RAVEN FOREST STRAND

  • AERION SHOP
  • LAREDO ENERGY
  • CHK
  • XTO
  • JAVELIN
  • GRIT
  • EOG
  • ENDEAVOR
  • LEWIS ENERGY
  • RAVEN FOREST
  • STRAND

• Rig Name and Number

  Select AERION SHOP HP 431 HP 424 HP 632 HP 508 CACTUS 144 NABORS 887 NABORS X51 PATTERSON 299 PD 549 PD 537 SAVANNA 654 LEWIS RIG 10 LEWIS RIIG 38 LEWIS RIG 42 SAVANNA 650

  • AERION SHOP
  • HP 431
  • HP 424
  • HP 632
  • HP 508
  • CACTUS 144
  • NABORS 887
  • NABORS X51
  • PATTERSON 299
  • PD 549
  • PD 537
  • SAVANNA 654
  • LEWIS RIG 10
  • LEWIS RIIG 38
  • LEWIS RIG 42
  • SAVANNA 650

• Conducted on

  Date

• Prepared by

• Location
  Address

• Centrifuge Model / Asset # Provide Photos

• Well Name

• Clean Coffin lid, chambers and below bowl? Provide Photo

  Yes

  No

  N/A

• Roll bowl by hand. Does bowl move freely?

  Yes

  No

  N/A

• Grease outer bearings 10 shots. provide photos

  Yes

  No

  N/A

• Purge Inner bearings until clean grease comes out of purge hole. Provide photos

  Yes

  No

  N/A

• Is gearbox @ 10 or 2? if below 10 or 2 fill to proper level. Provide photos

  Yes

  No

  N/A

• Is Fluid clutch oil @ 10 or 2 (if Equipped) Provide photos

  Yes

  No

  N/A

• Remove all guards and inspect belts. Provide photos

  Yes

  No

  N/A

• Remove feed tube, inspect feed tube. Provide photos

  Yes

  No

  N/A

• Record Pond Setting

• Check Plows/ wear inserts in good operating conditions. Provide photos

  Yes

  No

  N/A

• Inspect bowl for any uneven wear or damages. Provide Photos

  Yes

  No

  N/A

Final Inspection

• Centrifuge exterior clean? Provide photos

  Yes

  No

  N/A

• Centrifuge interior clean? Provide photos

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is coffin lid in good operating condition? Provide photos

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Are coffin lid bolts in good operating condition? Provide photos

  Yes

  No

  N/A

• Inspect Power cord. Provide Photos

  Yes

  No

  N/A

• Inspect Main drive and Back drive motor bolts, are they secure and tight.

  Yes

  No

  N/A

• Is centrifuge slide clean and clear of solid buildup? Provide photos

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Supply Pictures of centrifuge set up.

  Media