Title Page
-
Operator
- AERION SHOP
- LAREDO ENERGY
- CHK
- XTO
- JAVELIN
- GRIT
- EOG
- ENDEAVOR
- RAVEN FOREST
- LEWIS ENERGY
- STRAND
-
Rig name and Number
- AERION SHOP
- H&P 431
- H&P 424
- H&P 632
- H&P 508
- CACTUS 144
- NABOS 887
- NABORS X51
- PATTERSON 299
- PD 549
- PD 537
- SAVANNA 654
- LEWIS RIG 10
- LEWIS RIG 38
- LEWIS RIG 42
- SAVANNA 650
-
Conducted on
-
Prepared by
-
Location
General
-
Asset Number. Provide Photo
-
Inspect Frame for cracks and broken Welds. Provide Photos
-
Inspect cabinet for dents, bent door, rust and open holes. Provide Photos
-
Does HMI have Window kit (door) Provide Photos
-
Visually inspect all receptacles. Provide Photos
-
Visually Inspect Power cable. Provide Photos
-
Visually Inspect all Cable glands. Provide Photos
-
Visually Inspect Door Latches. Provide Photos
Electrical
-
LOTO VFD Panel if required. Provide Photos
-
Is VFD Grounded. Provide Photos
-
Open Door and Inspect inside door latch. Provide Photos
-
Inspect Piano Door Hinges.
-
Inspect door seal. Provide Photos
-
Inspect All Receptacles from inside panel, look for hot spots in wire and condition of plastic insert. Provide Photos
-
Remove 200amp.100amp, 60amp and 30amp plug from receptacle, inspect sleave, prongs and gasket. Provide Photos
-
Disassemble plugs from centrifuge and pump, inspect wire connection to prong. Provide Photos
-
Visually inspect wires for burnt marks and lose terminals. Provide Photos of inside Panel
-
Visually Inspect Communication cable
-
Above steps complete, close panel door and Remove LOTO
Function Test
-
Plug in Centrifuge, Pump and communication cable.
-
Power up Panel
-
Function Test Back drive, Main Drive and Pump Drive If applicable. Provide Photos
-
Function Test E Stop.
