Title Page
-
Conducted on
-
Prepared by
-
Location
Staff Details
-
Station.
-
Employee Name
-
Staff No.
-
Assessor
-
This is a revalidation record of operation training in accordance with the IATA recommendations AHM611.5 and AHM591. All revalidation training where new learnings are reviewed will include classroom elements in compliance with IOSA and ISAGO GSOM Standards.
Pass mark is 80%
Assessment
-
Started
-
1. During all phases of the operation, did the employee wear all required PPE in accordance with operating procedures?
-
2.Completed vehicle pre-trip inspection/ Walk-around check including removal of all FOD.
-
3.Demonstrated emergency stop button
-
4.Demonstrated correct use of safety rails.
-
5.Demonstrated vehicle height, width and length awareness.
-
6.Demonstrated understanding of vehicle dashboard panel.
-
7.Demonstrated correct GSE parking procedure.
-
8.Demonstrated correct use of controls Brake, Accelerator, Handbrake, Control lever, Lights, Wipers, Indicators
-
9.Demonstrated correct use of vehicle chocks.
-
10. Demonstrated correct and safe raising and lowering of platform.
-
11. Did not approach an arriving aircraft until anti-collision lights are off, chocks in place, engines spooled down and break test completed. <br>
-
12. Demonstrated correct procedure for positioning GSE on to aircraft including no touch policy.
-
13.Demonstrated location and use of belt start/ stop button.
-
14.Complied with the Road Traffic Act while driving.
-
15. Did not drive with the platform in the raise position.
-
16.Did not drive with baggage, cargo, mail, HUM or personnel on the platform.
-
17. Demonstrated the application of correct operational procedures at the aircraft
-
18. Demonstrate compliance with Manual Handling Instruction for Hold 5.
-
19.Demonstrate holds checked before removal of GSE.
-
20. Demonstrated correct parking procedure upon completion of flight.
Flights Completed
-
List of completed flights Example Flt No Date Reg A/C Type 104 24APR DUB 330 If not flight related please state.
Flights Completed
-
Comments
-
I have received training on the equipment listed above, I understand the operation of this equipment and I am aware of the location and functions of the controls. I understand the procedures and regulations as outlined in my training and instruction.
-
Trainee Signature
-
Assessors Signature
-
Completed
