Aer Lingus - RAMP CCL Revalidation V2018.0

• Conducted on

  Date

• Prepared by

• Location
  Address

Staff Details

• Station.

  DUB

  ORK

  SNN

• Employee Name

• Staff No.

• Assessor

• This is a revalidation record of operation training in accordance with the IATA recommendations AHM611.5 and AHM591. All revalidation training where new learnings are reviewed will include classroom elements in compliance with IOSA and ISAGO GSOM Standards.
  
  Pass mark is 80%

Assessment

• Started

  Date

• 1. During all phases of the operation, did the employee wear all required PPE in accordance with operating procedures?

  Yes

  No

• 2.Completed vehicle pre-trip inspection/ Walk-around check including removal of all FOD.

  Yes

  No

  N/A

• 3.Demonstrated the location and function of all 3 emergency stop buttons.

  Yes

  No

  N/A

• 4.Demonstrated vehicle height, width and length awareness.

  Yes

  No

  N/A

• 5.Demonstrated correct use of controls: Brake, Accelerator, Handbrake, Control lever including engine start. stop and pre-heat.

  Yes

  No

  N/A

• 6. Did not approach an arriving aircraft until anti-collision lights are off, chocks in place and engines spooled down.

  Yes

  No

  N/A

• 7.Demonstrated correct procedure for positioning GSE on to aircraft including brake test, not driving under wing and no touch policy.

  Yes

  No

  N/A

• 8.Demonstrated during operation did not drive under wing.

  Yes

  No

  N/A

• 9. Demonstrated correct operation of roller levers and guide rails.

  Yes

  No

  N/A

• 10.Demonstrated correct use of the height selection button and height adjuster switch.

  Yes

  No

  N/A

• 11.Demonstrated correct use of the rear platform operating controls.

  Yes

  No

  N/A

• 12.Demonstrated correct use of the pallet stop selector switch.

  Yes

  No

  N/A

• 13.Demonstrate the correct use of pallet stops and transfer controls as are operational procedures.

  Yes

  No

  N/A

• 14 Demonstrated correct use of platform raise /lower acknowledge button and joystick.

  Yes

  No

  N/A

• 15. Demonstrated the application of correct operational procedures at the aircraft

  Yes

  No

  N/A

• 16.Followed corrected procedure ensuring the GSE was lowered before reversing.

  Yes

  No

  N/A

• 17.Ensured ULDs are transferred on and off dollies in accordance with procedures and locking devices were engaged.

  Yes

  No

  N/A

• 18. Demonstrated Manual Handling awareness Instruction e.g. get assistance if required, check straps, slips trips and falls

  Yes

  No

  N/A

• 19. Demonstrated correct parking procedure both pre and post flight.

  Yes

  No

  N/A

• 20.Used the protective cover for operating controls.

  Yes

  No

  N/A

Flights Completed

• List of completed flights Example Flt No Date Reg A/C Type 104 24APR DUB 330 If not flight related please state.

Flights Completed

• Comments

• I have received training on the equipment listed above, I understand the operation of this equipment and I am aware of the location and functions of the controls. I understand the procedures and regulations as outlined in my training and instruction.

• Trainee Signature

  Sign

• Assessors Signature

  Sign

• Completed

  Date