Title Page
-
Conducted on
-
Prepared by
-
Location
Staff Details
-
Station.
-
Employee Name
-
Staff No.
-
Assessor
-
This is a revalidation record of operation training in accordance with the IATA recommendations AHM611.5 and AHM591. All revalidation training where new learnings are reviewed will include classroom elements in compliance with IOSA and ISAGO GSOM Standards.
Pass mark is 80%
Assessment
-
Started
-
1. During all phases of the operation, did the employee wear all required PPE in accordance with operating procedures?
-
2.Completed vehicle pre-trip inspection/ Walk-around check including removal of all FOD.
-
3.Demonstrated the location and function of the emergency stop button.
-
4.Demonstrated correct use of safety rails.
-
5.Demonstrated understanding of both driving and loading controls.
-
6. Did not approach an arriving aircraft until anti-collision lights are off, chocks in place and engines spooled down.
-
7.Demonstrated correct use of controls: Brake, Accelerator, Handbrake, Control lever including stabilisers.
-
8.Demonstrated understanding of operator's post forward/ backs
-
9.Demonstrated during operation did not drive under wing.
-
10.Demonstrated vehicle height, width and length awareness.
-
11 Demonstrated correct procedure for positioning GSE on to aircraft including brake test and no touch policy.
-
12. Demonstrated correct and safe raising and lowering of platforms.
-
13.Demonstrate the correct use of pallet stops and transfer controls as are operational procedures.
-
14. Demonstrated the application of correct operational procedures at the aircraft
-
15. Did not drive with the platform in the raised position.
-
16. Demonstrated correct use of both forward and rear platform height adjustment.
-
17.Did not allow any personnel on the LDL while driving or positioning.
-
18. Demonstrated Manual Handling awareness Instruction e.g. get assistance if required, check straps, slips trips and falls
-
19.Demonstrate holds checked before removal of GSE.
-
20. Demonstrated correct parking procedure upon completion of flight.
Flights Completed
-
List of completed flights Example Flt No Date Reg A/C Type 104 24APR DUB 330 If not flight related please state.
Flights Completed
-
Comments
-
I have received training on the equipment listed above, I understand the operation of this equipment and I am aware of the location and functions of the controls. I understand the procedures and regulations as outlined in my training and instruction.
-
Trainee Signature
-
Assessors Signature
-
Completed