Title Page
-
Conducted on
-
Prepared by
-
Location
Staff Details
-
Station.
-
Employee Name
-
Staff No.
-
Assessor
-
This is a revalidation record of operation training in accordance with the IATA recommendations AHM611.5 and AHM591. All revalidation training where new learnings are reviewed will include classroom elements in compliance with IOSA and ISAGO GSOM Standards.
Pass mark is 80%
Assessment
-
Started
-
1. During all phases of the operation, did the employee wear all required PPE in accordance with operating procedures?
-
2.Ensured only Aer Lingus dollies were used.
-
3. Did not walk between dollies while connected.
-
4.Completed pre-trip inspection/ Walk-around check including check tow hitch and locks, removal of all FOD and area clear from obstruction.
-
5.Demonstrate the towing rule of a maximum towing rule of 4 dollies.
-
6.Demonstrated correct procedure for securing containers (ULDs) on dollies.
-
7.Demonstrated train height, width, length and extended turning circle awareness.
-
8.Demonstrated the appropriate speed based on the load under tow. Max 24kph
-
9.Demonstrated during operation not driving under wing.
-
10.Demonstrated correct use of procedure for transferring containers
-
11.Ensured ULDs are transferred on and off dollies in accordance with procedures and locking devices were engaged.
-
12.Followed procedure to ensure no cargo are towed behind the baggage dollies.
-
13. Demonstrated the correct procedures for use at baggage hall stillage.
-
14. Demonstrated the application of correct operational procedures when approaching and departing the loading platform.
-
15. Demonstrated Manual Handling awareness Instruction e.g. get assistance if required, check straps, slips trips and falls
-
16. Demonstrated correct parking procedure both pre and post flight including application of parking brake.
Flights Completed
-
List of completed flights Example Flt No Date Reg A/C Type 104 24APR DUB 330 If not flight related please state.
Flights Completed
-
Comments
-
I have received training on the equipment listed above, I understand the operation of this equipment and I am aware of the location and functions of the controls. I understand the procedures and regulations as outlined in my training and instruction.
-
Trainee Signature
-
Assessors Signature
-
Completed
