Information
-
Job Site / Project Name
-
Location
-
Scope of work
-
Conducted on
-
Craft trades inspected
- Fitter
- Plumber
- Sprinkler
- Electrcian
- HVAC Technician
- Balancer
- Sheet Metal
- Insulator
- Rigger
-
Inspected by
General Items
-
OSHA and required State posters displayed?
-
Emergency numbers and medical facility information posted?
-
First aid kits available and adequately stocked?
-
Tool box talks conducted weekly? Daily job briefings conducted when needed?
-
Potable water, hand wash, and toilet facilities available?
-
Material safety data sheets (MSDS) and/or Safety Data Sheets (SDS) available?
-
Ingress/egress to building/work location adequate and emergency exits marked?
-
General public and other trades protected from craft work?
-
Storage/lay-down area adequate?
-
General lighting and temporary electrical power adequate?
Compressed gas cylinders
-
Oxygen/fuel cylinders separated by 20' or 5' high one hour fire barrier?
-
Stored upright, secured from tipping, labeled, and wrenches available?
-
Regulators removed and caps in place when stored more than 24 hours?
-
Hoses, torches free from defects? Flash arresters installed? Gauges functioning?
Concrete, silica
-
Workers protected from silica exposure?
-
Rebar impalement protection in place?
-
Workers protected from over-head work?
Personal Protective Equipment (PPE)
-
Correct PPE worn when/where required?
-
Adequate spare PPE items on hand?
-
PPE properly maintained?
Electrical
-
Temporary power panels, outlets in good condition?
-
Extension cords in good condition, adequate gauge size, inspected?
-
Extension cords laid along walls or up overhead to prevent tripping hazard?
-
GFCI used?
Excavation, Trench, Shoring.
-
Spoil piles back at least two feet? Mechanized equipment kept clear?
-
Escape ladder within 25'? Extends 3' above?
-
5' feet or deeper protected by sloping, benching or protective systems?
-
Inspected daily?
-
Fall protection for depth greater than 6' when not visible?
Fall protection, slips, trips, falls.
-
Leading edges > 6' protected adequately?
-
Floor openings covered/marked/secured? Suitable for expected load?
-
Tripping/slipping hazards?
-
Rooftop work: Leading edges? Sky lights? Flagging system set back 15-25 feet?
-
Personal fall protection: Harnesses, lanyards, anchor points, free-fall clearance?
Fire prevention.
-
Flammable/combustible liquids stored clear of ignition sources?
-
Portable containers approved for use, marked?
-
Adequate number of charged, inspected fire extinguishers available?
-
Flammable/combustible material/debris kept clear of hot work?
-
Hot work permits submitted?
-
Fire watch in place where required?
Housekeeping.
-
Suitable containers available for trash/debris disposal?
-
Workers clear of debris trash chutes, debris removal process?
-
Walkways, aisles, passageways clear of trash, debris, material?
Ladders, stairways.
-
Ladders inspected prior to use? Safety labels legible? Non-conductive material?
-
Step ladders used in fully opened position and on level surface?
-
Top two steps not used? Worker faces ladder, not leaning to reach work?
-
Straight ladders extend 3' above edge, pitched 4:1, secured from movement?
-
Job-built ladders constructed properly?
-
Stairways equipped with hand rail? Properly illuminated? Free of debris, slip, trip hazards?
Material handling, storage.
-
Proper lifting techniques used for manual lifting?
-
Pipe carts, dollies, hand carts used when possible?
-
Stored clear of leading edges and not higher than toe boards? Secured from toppling?
-
Protected from elements where required?
Scaffolding.
-
Erected on firm, level footings? Secured to structure where required?
-
Guard rails and toe boards in place when working surface greater than 10' high?
-
Planking OSHA approved, sound, secured, not excessively overlapped?
-
Adequate access provided?
-
Inspected daily? Inspection tag legible?
Scissor, aerial lifts.
-
Inspected daily prior to use? Manufacturer's manual on board? Labels legible?
-
Operated on level footing as required by manufacturer?
-
PFAS used in aerial lift basket? Correct anchor point? Correct lanyard?
-
Workers below clear of overhead hazards?
-
Operated by trained workers only?
Tools, equipment.
-
Tools, equipment in good condition? Inspected prior to use?
-
Defective equipment tagged and removed from work area?
-
Protective guards in place? Tool safety function not bypassed?
-
Correct tool, equipment used for task at hand?
-
Unused tools secured in gang box? Unused equipment secured with chains?
Signature
-
Inspected by:
-
Inspected by signature:
-
Jobsite Foreman:
-
Jobsite Foreman sgnature: