Information
-
Client / Site
-
Add media
-
Conducted on
-
Prepared by
-
Site Engineer
-
Check calibration of all transducers including Smartcool. If CO2 please contact Technical Support for guidance or advise.
-
Check oil levels and reservoirs / separators for correct operation
-
Add media
-
Check compressor staging is operational
-
Check condensers and Gas Coolers, ensure free from debris. If filters are fitted these must be replaced
-
Add media
-
Check operation and rotation of all condenser / gas cooler fans
-
Add media
-
Check and mark all refrigerant levels where possible
-
Are all cold stores free from ice build up and doors safe and fully operational
-
Add media
-
Engineer Signature