Information
-
Document No.
-
Training Record for
-
Conducted on
-
Trained By
Cleaners Training
-
Complete General Training
-
General training
-
Care of cleaning equipment
-
Care of cleaners room
-
Vacuum cleaning
-
Kitchen and lunch room cleaning
-
Shower cleaning
-
Toilet, Urinal and Basin cleaning
-
Dusting High and Low
-
Empty waste bins and ashtrays
-
Sweeping
-
Floppy Mopping
-
Wet mopping
-
Spot Mopping
-
Spot Cleaning
-
Glass Cleaning
-
Job Specific Training
-
Wall washing
-
Dust mopping
-
Venetian blind cleaning
-
Curtain cleaning
-
Remove graffiti
-
Vinyl strip and seal
-
Spray Buffing
-
Stair Cleaning
-
Complete Vacuum Training
-
Fitting
-
Connect hose to clear dome with connector on vauuming arm side of machine
-
Loosen off shoulder straps
-
Lift machine with right hand sliding left arm into left strap and onto shoulder.
-
Slide right arm through right strap and settle machine into small of back
-
Secure waist band comfortably
-
Tighten should straps by pulling down on tabs until weight of machine is being carried by the waist band
-
Tighten waist band as necessary
-
Operation
-
Stand upright with the elbow of the wand parallel to the floor. Grip the elbow of the wand with one hand and hold it a comfortable arms lengh
-
Once the end of the lead has been reached and work completed, return to power point along lead line
-
Disconnect lead from power point roll cord and move to next power ppoint, do not drag cord around corners.
-
When finished remove backpack by undoing belt, loosening straps and sliding backpack from left should and lowering gently to the floor.
-
Maintenance
-
Remove and empty dust bag
-
Remove and clean filter
-
Inspect and roll up electrical cords check Test and Tag
-
Check for obstructions
-
Clean vacuum cleaner
-
Completed Glass Training
-
Cleaning mixture
-
Use of cleaning T-Bar
-
Cutting in
-
Use of Squeege
-
Dry edges and sills
-
Complete Polisher Training
-
Inspect Polisher, PPE and safety requirements
-
Fit pads and Brushes
-
Vacuum Operation
-
Starting proceedure
-
Use of polisher
-
Spray buffing and scrubbing
-
Safety Inspection, cleaning and storage
-
SDU training
-
-
SDU operation, back, bag and chemical application
-
Remove liner and waste and replace new liner, apply correct chemical dosage
-
Clean outside and surrounds of SDU
-
Place waste in general waste disposal bin
-
Maintain SDU cleaning equipment
-
Assess hazards, PPE and chemicals
Cerification
-
Training Completed and competency verified as per the checklist
-
Select date
-
I verify that i have undertaken and completed training as indicated
-
Select date