Information
-
Construct Services Job Number.
-
Property Address.
-
Prepared by
-
Conducted on
-
Insurance Company
-
Claim Number
-
Adjuster Company
-
Adjuster Contact
Inspection Details.
-
Persons on site at time of inspection.
- Builder/Supervisor
- Client
- Client Representative
Scope of Inspection/Purpose:
-
Provide an existing conditions report on the above property and in particular to note damage, cracking, defects or disrepair (both internal and external) existing prior to commencement of any works
Add Area
- Add Defect
-
Add media
Disclaimer
-
Important Information Regarding the Scope and Limitations of the Inspection and a Report
The report is NOT an all-encompassing report dealing with the building from every aspect. It is a reasonable attempt to identify any obvious or significant defects apparent at the time of the inspection. Whether or not a defect is considered significant or not, depends, to a large extent, upon the age and type of the building inspected.
This report is not a Certificate of Compliance with the requirements of any Act, Regulation, Ordinance or By-law.
It is not a structural report.
THIS IS A VISUAL INSPECTION ONLY limited to those areas and sections of the property fully accessible and visible to the Inspector on the date of Inspection.
The inspection DOES NOT include breaking apart, dismantling, removing or moving objects including, but not limited to, foliage, mouldings, roof insulation/sisalation, floor or wall coverings, sidings, ceilings, floors, furnishings, appliances or personal possessions. The inspector CANNOT see inside walls, between floors, inside skillion roofing, behind stored goods in cupboards, other areas that are concealed or obstructed. The inspector WILL NOT dig, gouge, force or perform any other invasive procedures.
The Report does not and cannot make comment upon:
Defects that may have been concealed, the assessment or detection of defects (including rising damp and leaks) which may be subject to the prevailing weather conditions, whether or not services have been used for some time prior to the inspection and whether this will affect the detection of leaks or other defects (eg. In the case of shower enclosures the absence of any dampness at the time of the inspection does not necessarily mean that the enclosure will not leak).
The presence or absence of timber pests, gas-fittings; common property areas, environmental concerns, the proximity of the property to flight paths, railways, or busy traffic, noise levels; health and safety issues, heritage concerns, security concerns, fire protection, site drainage (apart from surface water drainage), swimming pools and spas (non-structural), detection and identification of illegal building work, detection and identification of illegal plumbing work, durability of exposed finishes, neighbourhood problems, document analysis, electrical installation, any matters that are solely regulated by statute, any area(s) or item(s) that could not be inspected by the consultant.
Accordingly this Report is not a guarantee that defects and/or damage does not exist in any inaccessible or partly inaccessible areas or sections of the property
This report may not be used by a third party and is only the property of Construct Services and/or the client whom directly engaged Construct Services .