Information

  • Site conducted

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

1. Access

  • 1.1. Are arrangements in place to deal with new visitors to site?

  • 1.2. Can all personnel reach their place of work safely - are all gangways clear?

  • 1.3. Are all walkways level and free from obstruction?

  • 1.4. Is edge protection in place on all scaffolds and leading edges?

  • 1.5. Are all holes clearly marked and protected?

  • 1.6. Is site tidy with all materials stored safely?

  • 1.7. Is all waste collected and disposed of properly?

  • 1.8. Are waste chutes provided to stop throw of materials from height?

  • 1.9. Are all timbers free from protruding fixings?

  • 1.10. Is sufficient background lighting provided?

2. Ladders

  • 2.1. Are all ladders Class 1 industrial?

  • 2.2. Are ladders the correct means of access?

  • 2.3. Are all ladders in good repair?

  • 2.4. Are all ladders on firm, level bases?

  • 2.5. Are all ladders correctly placed for access?

  • 2.6. Are all ladders correctly secured?

  • 2.7. Do all ladders extend sufficiently above stepping off point?

3. Scaffolds

  • 3.1. Is there safe and proper access to the scaffold platform?

  • 3.2. Are all uprights properly grounded or provided with base plates?

  • 3.3. Is the scaffold properly tied to the building

  • 3.4. Are all scaffold ties in place?

  • 3.5. Are all uprights, ledgers, transoms and braces in place?

  • 3.6. Are all load bearing fittings in place?

  • 3.7. Are all working platforms fully and safely boarded?

  • 3.8. Are all scaffold boards free from defects?

  • 3.9. Are all loads evenly distributed on scaffold?

  • 3.10. Are all signs in place on the scaffolds

  • 3.11. Are the scaff-tags correctly displayed?

4. Excavations

  • 4.1. Are all underground services located and marked?

  • 4.2. Are adequate supplies of shoring available for excavation protection?

  • 4.3. Are all trenches correctly dug with sloped or shuttered sides?

  • 4.4. Is safe access provided to all excavations?

  • 4.5. Are barriers in place around all excavations?

  • 4.6. Are warning signs in place around all excavations?

  • 4.7. Are all stacked materials a safe distance (min 1 metre) from edge of excavation?

  • 4.8. Are stop arrangements in place to prevent vehicles reaching excavations (min distance 1 metre).

  • 4.9. Are arrangements in place to remove water from excavations?

  • 4.10. Are excavation records being correctly maintained?

  • 4.11. Is excavation permit to work system in use?

  • 4.11. Are withdrawn permits retained in records?

5. Roof Working

  • 5.1. Are crawl ladders and crawl boards in place when pitch of roof is 10 degrees or over?

  • 5.2. Do roof battens provide safe hand and foot holds?

  • 5.3. Is edge protection in place around open edges?

  • 5.4. Are guard rails and covers in place over roof openings?

  • 5.5. Are roof openings all clearly signed to warn of danger?

  • 5.6. Are guard rails provided around all roof lights?

  • 5.7. Are all fragile sections of roof clearly marked and guarded with crawl boards in place?

  • 5.8. Is protection to prevent falling debris in place?

  • 5.9. Is a roof permit to work system operated?

  • 5.10. Are withdrawn permits retained in records?

6. Transport and mobile plant?

  • 6.1. Are maintenance records available for all plant?

  • 6.2. Is all plant in good repair and well maintained?

  • 6.3. Is all plant supplied with operating instructions and maintenance manuals?

  • 6.4. Is all plant operated by trained competent operators?

  • 6.5. Are operators licenses available for inspection?

  • 6.6. Is all plant properly and safely loaded?

  • 6.7. Are all guards firmly in place on plant?

7. Machinery

  • 7.1. Are all machine guards firmly in place?

  • 7.2. Are all drive arrangements (belts, gears, chains etc) securely guarded?

  • 7.3. Is all machinery operated by trained competent operators

  • 7.4. Are all operators certificates available for inspection?

8. Cranes and lifting gear

  • 8.1. Are there test certificates for all cranes and lifting gear?

  • 8.2. Are crane drivers trained and competent?

  • 8.3. Are crane controls clearly marked?

  • 8.4. Do cranes have automatic safe load indicators?

  • 8.5. Are crane drivers certificates available?

  • 8.6. Are cranes and lifting devices properly sited?

  • 8.7. Is the crane capacity sufficient?

  • 8.8. Is a banks man/slinger trained and competent?

  • 8.9. Are crane maintenance records available?

  • 8.10. Is lifting gear properly stored?

  • 8.11. Is all lifting gear visibly checked before each use?

9. Electricity

  • 9.1. Are all portable electrical tools operated at 110v?

  • 9.2. Are all portable electric tools PAT tested and marked?

  • 9.3. Are all portable electric tools in good condition?

  • 9.4. Are all connections and cables in good condition?

  • 9.5. Is an electrical permit to work system operated?

  • 9.6. Are all returned permits retained in records?

  • 9.7. Are all overhead cables which might interfere with operations been identified and clearly marked?

  • 9.8. Is a secure electrical lock-out system operated?

10. Cartridge operated tooling.

  • 10.1. Are tools and cartridges kept in safe secure storage when not in use?

  • 10.2. Is check made to ensure all cartridges going to scrap are used?

  • 10.3. Are tool operators trained and competent?

  • 10.4. Are all tool instruction manuals with tools?

  • 10.5. Are operators working in personnel exclusion zones?

  • 10.6. Are other personnel excluded from other side of any explosive operation?

11. Formwork & Falsework

  • 11.1 Is there a method statement for the construction of the formwork/Falsework.

  • 11.2 Have the design and supports for shuttering and framework been checked before use?

  • 11.3 Is the formwork/Falsework being constructed from proper platforms and scaffolds?

  • 11.4 Are bases and ground conditions suitable for the loads being applied?

  • 11.5 Are all props correctly set out on firm, level bases?

  • 11.6 Are all props fitted with correct pins?

  • 11.7 Are all timbers in good condition?

  • 11.8 Has/will the structure been/be inspected for compliance with design before use?

12. Public access

  • 12.1. Are all barriers in place to prevent public access to the worksite?

  • 12.2. Is all overhead protection in place to protect public from falling materials?

  • 12.3. Is the site perimeter fencing in good repair and secure?

  • 12.4. Is the site secure during non-working periods?

  • 12.5. Are all steps taken to prevent easy access to scaffolds or site areas during non-working periods?

13. Fire

  • 13.1. Are the correct numbers and types of fire extinguishers in place on site?

  • 13.2. Are all escape routes clearly marked and free of obstructions?

  • 13.3. Are all personnel aware of emergency procedures.

  • 13.4. Are there proper safe storage facilities for flammable liquids?

  • 13.5. Is there proper segregated storage for gas cylinders?

  • 13.6. Are safe storage facilities properly used?

  • 13.7. Is a hot work permit system being used?

  • 13.8. Are returned hot work permits retained in records?

  • 13.9. Are all gas cylinders properly closed and disconnected when not in use?

14. Noise

  • 14.1. Has a noise risk assessment been completed for site?

  • 14.2. Is all plant fitted with silencers and/or exhaust muffs?

  • 14.3. Are all noise control ares clearly marked with ear protection signs in place?

  • 14.4. Are all personnel wearing ear protection in designated areas?

  • 14.5. Are noise checks carried out if requested or if levels are felt to be excessive?

15. Health

  • 15.1. Have all hazardous substances (asbestos, solvents etc) been identified?

  • 15.2. Are COSHH assessments available on site?

  • 15.3. Are COSHH personal protective equipment requirements complied with by site personnel?

  • 15.4. Is a confined space permit to work system in operation,

  • 15.5. Are returned confined space permits retained in records?

16. Manual Handling

  • 16.1. Are manual handling assessments carried out for unusual loads?

  • 16.2. Are operators trained and competent in manual handling procedures and techniques?

  • 16.3. Is manual handling kept to a minimum by use of handling aids and plant?

17. Protective clothing and equipment

  • 17.1. Is wet weather clothing provided?

  • 17.2. Is suitable personal protective clothing and equipment made available to all site personnel and visitors?

  • 17.3. Is specific personal protective equipment located near equipment for which it is required?

  • 17.4. Is PPE maintained and in good condition?

  • 17.5. Do all personnel wear their required PPE?

18. Welfare

  • 18.1. Are suitable toilet facilities available on site?

  • 18.2. Are there adequate hot and cold water supplies available on site?

  • 18.3. Are there adequate clothes drying facilities available on site?

  • 18.4. Are there adequate facilities for the consumption of food available on site?

  • 18.5. Are facilities for the consumption of food maintained clean and tidy?

  • 18.6. Are all food wastes disposed of in sealed containers and not left to attract vermin?

  • 18.7. Is a warm rest area provided to allow seated relief from cold site conditions?

  • 18.8. Is a segregated external soaking area provided?

  • 18.9. Are first aid facilities available on site?

  • 18.10. Are first aid box contents checked at regular intervals and replenished as required?

19. Documentation

  • 19.1. Is a copy of the F10 displayed on site?

  • 19.2. Is a copy of the construction phase health and safety plan on site?

  • 19.3. Is a copy of the health and safety policy on site?

  • 19.4. Are copies of all risk assessments and method statements on site?

  • 19.5. Are scaffold log books/scafftags available on site?

  • 19.6. Are training records for legally recognised youngsters on site?

  • 19.7. Are there young persons risk assessments completed if required?

  • 19.8. Are test certificates for all hired plant available on site?

20. Unidentified Fibrous Material

  • 20.1 Has material been found which cannot be identified?

  • 20.2. Are materials being used to which additional precautions may be required? (MDF etc)?

  • 20.3. Are there any new working areas within the site?

  • 20.4. Has a survey been carried out in the area to ensure all fibrous materials have been identified?

  • Auditors signature

  • Site managers signature of acknowledgement

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.