COOLING TOWER DATA SHEET

• TECHNICIAN NAME

• SITE NAME

• SITE LOCATION

• COOLING TOWN (CT) LOCATION

INSPECTION AND CLEANING

• PLEASE NOTE AND TAKE PICTURES OF ANY DEFICIENCIES

• OBSERVE THE GENERAL CONDITION OF THE UNIT AND CHECK FOR UNUSUAL NOISE OR VIBRATION

• INSPECT COLD WATER BASIN

• FLUSH WATER DISTRIBUTION SYSTEM / INSPECT SPRAY NOZZLES

• INSPECT /CLEAN DRAIN BASIN AND PIPING

• OBSERVE AIR INLET LOUVRES / COMBINED INLET SHIELDS

• CHECK AND ADJUST WATER LEVEL IN BASINS

• CHECK OPERATION OF THE MAKE-UP VALVE

• CHECK AND ADJUST THE BLEED RATE

• INSPECT UNIT FINISH

MECHANICAL EQUIPMENT SYSTEM

• PLEASE NOTE AND TAKE PICTURES OF ANY DEFICIENCIES

• CHECK BELT CONDITION

• ADJUST BELT TENSION

• LUBRICATE FAN SHAFT BEARINGS

• LUBRICATE MOTOR BASE ADJUSTING SCREW

• CHECK AND LUBRICATE OPTIONAL GEAR DRIVE

• CHECK DRIVE ALIGNMENT

• CHECK AND NOTATE VOLTAGE AND AMPERAGE

• CLEAN FAN MOTOR EXTERIOR

• CHECK FAN MOTOR FOR PROPER ROTATION

• CHECK THE GENERAL CONDITION OF THE FAN

• INSPECT AND UNPLUG FAN DRAIN HOLES

• CHECK FAN FOR UNIFORM PITCH

• CHECK AND RECOAT STEEL SHAFTS WITH RUSTPROOF PAINT ON NEWLY INSTALLED BELTS, MUST BE REGULATED AFTER THE FIRST 24HRS OF ITS OPERATION AND QUARTERLY