DMR T3 As-built v1.6

• Site Name

• Installation engineer:

  Select Russell Benson Freey Makore Edward Blackwell Irtiza Mumtaz Abu Hassan Contractor

  • Russell Benson
  • Freey Makore
  • Edward Blackwell
  • Irtiza Mumtaz
  • Abu Hassan
  • Contractor

• Company Name

• Engineer 1

• Engineer 2

• Select date

  Date

Site InstallationDetails

• Site Installation Work

  Select Rectifier system installation/Power cabling Tier III installation Microwave installation Router installation Switch Installation

  • Rectifier system installation/Power cabling
  • Tier III installation
  • Microwave installation
  • Router installation
  • Switch Installation

Rectifier system installation

• Rectifier type

  Select Enatel Compact Enatel Flexi 1 battery bank 2 battery banks

  • Enatel Compact
  • Enatel Flexi
  • 1 battery bank
  • 2 battery banks

• Rectifier photo

  Media

• Battery photo

  Media

• Battery Breaker Installation

  Yes

  No

  N/A

• Comments*

• Add media

  Media

• MCB Panel Installation

  Yes

  No

  N/A

• Comments*

• Add media

  Media

AC/DC Installation Quality Check Sheet

• AC mains checked and value at acceptable levels (220~240v)

• Health check conducted for the rectifier and associated breaker panels. Output voltage levels etc

• Rectifier, battery shelves are fastened properly in the rack

• Breaker panels are properly installed

• All cables terminated are properly sleeved and protected with heat shrinks

• All power cables are properly labeled

• Pictures of power cables termination, connectors, and labelling.

  Media

Tier III DMR installation

• Repeaters

Repeater

• Repeater model

  TB7300S

  TB7300D

  TB9300S

  TB9300D

• Asset number

• Serial number

• Channel 1

• Control

  Voice

• Channel 2

• Control

  Voice

• Repeater photo(s) Front and rear

  Media

• RF Installation - Antenna/Feeders

  Yes

  No

  N/A

• Description of work:

• Add media

  Media

• RF Installation - Combiner

  Yes

  No

  N/A

• Description of work:

• Add media

  Media

• RF Installation - Filters

  Yes

  No

  N/A

• Description of work:

• Add media

  Media

• RF cabelling

  Yes

  No

  N/A

• Description of work:

• Add media

  Media

• RF Filter tuning

  Yes

  No

• Number of Channels tuned and the channel ID

Radio Installation Quality Check Sheet

• Radios are fastened properly in the rack

• All radios are properly labeled with correct channels

• All BNC/N connectors are crimped and terminated correctly with proper tighthning

• All cables are labelled

• Pictures of BNC/N connectors on both sides, labelling,.

  Media

Switch Installation

• Switch model

  Nokia SAS

  Other

• Switch model

• Asset number

• Serial number

• Add media

  Media

Switch Installation Quality Check Sheet

• Switch is fastened properly in the rack

• IP diagram has been followed and all changes are recorded in red line diagram

• Ethernet cabling is labelled for all connecting devices

• Picture of ethernet cable connections on switch, labelling

  Media

Router Installation

• Router model

  SAR-8

  SAR-Ax

  Other

• Router Model

• Asset number

• Serial number

• Add media

  Media

Router Installation Quality Check Sheet

• is fastened properly in the rack

• IP diagram has been followed and all changes are recorded in red line diagram

• Ethernet cabling is labelled for all connecting devices

• Picture of ethernet cable connections on switch, labelling

  Media

• Comments

• Additional pictures required Overview of the power rack Overview of the equipment rack Close-up of mains distribution Rectifier power socket Overview of the equipment room Outside building photo(s) Tower photo(s)

  Media