Information

  • Site Name

  • Site Address

  • Postcode

  • Engineer Name

  • Date of Survey/Sign-Off/Audit

  • Tesseract Number:

Installation

Installation and Configuration

  • Call éclair on 0203 695 8480 and inform them you are on site and are going to take the dish of line. Then commence the upgrade

  • Describe current eclair digital 905 dish location and access to location

  • Photograph of existing dish/dish location

  • Are two IF (coax) cables already in-situ from dish location to IDC location?

  • Describe what's installed and what cable type, length and route is required

  • Have approvals and permissions been supplied for cable to be installed at time of visit?

  • State reason why required cabling can't be installed and complete a survey form

  • Can line of sight be obtained to 1° West and 5° West from current location?

  • Can line of sight be obtained to 1° West and 5° West if dish is relocated and is it possible to relocate the dish at the time of this visit?

  • Describe what works are needed to relocate the dish

  • Contact the Office to get permission to carry out relocation

  • Complete a full survey for the works required

  • Any other issues preventing completion of the upgrade?

  • Describe reasons preventing successful completion of upgrade

  • Take photos showing reasons why upgrade can't be completed

  • Is the current system Coax or Fibre?

  • Fibre sites - remove fibre LNB and install new dual set up and align as per Engineers Installation Document. All removed fibre kit (eg LNB’s and GTU’s) are to be identified with the site name and returned to Harlow office.

  • Coax sites - realign dish to 1° West (10-02). Remove the existing LNB and install new dual feed as per Engineers Installation Document.

  • Take Photographs of dish/LNB’s/switches on completion of upgrade

Commissioning

  • Satellite parameters (test frequencies) are as follows:
    1° West (10-02) – on the meter you need to have DiSEqC turned on, go to commands, and select AB-B
    Freq: 12,643
    Sym: 27500
    FEC: 3/4
    Polarisation: H
    Modulation: DVB-S

    5° West (E5WA) – on the meter you need to have DiSEqC turned off, go to commands, and select AB-A
    FREQ: 11,634
    SYM: 30,000
    FEC: 3/4
    Polarisation: H
    Modulation: DVB-S2

  • Record the following at the receiver location - 1° West (10-02) – Cable 1

  • C/N (db)

  • MER (db)

  • Power (db)

  • Record the following at the receiver location - 5° West (E5WA) – Cable 1

  • C/N (db)

  • MER (db)

  • Power (db)

  • Record the following at the receiver location - 1° West (10-02) – Cable 2

  • C/N (db)

  • MER (db)

  • Power (db)

  • Record the following at the receiver location - 5° West (E5WA) – Cable 2

  • C/N (db)

  • MER (db)

  • Power (db)

  • Call éclair on 0203 695 8480 and ask them to check and confirm the dish is within specification and if it is ask for a clear code

  • Take photographs of front of IDC on both input 1 and input 2 to show levels on IDC

General comments / Further actions required

  • Any additional comments

  • Any additional photos

Sign-Off

Client

  • I confirm the works carried out were agreed and approved

  • Client/Site Contact Name

  • Client/Site Contact Position

  • Client/Site Contact Signature

Engineer

  • Engineer Name

  • Engineer signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.