Equans ST Sadef Checklist

• Site inspected

  Select

• Inspected on

  Date

• Inspected by

• Location
  Address

• Row number

• Table counted from West

Control section

• Controlled by

• Signature

  Sign

Approve section

• Approved by

• Signature

  Sign

• SADEF structural drawings and assembly instruction are available on site and understood by installer?

  Compliant

  Non-Compliant

  N/A

• Edge (unsheltered) and middle (sheltered) tables distribution is according to the layout plan?

  Compliant

  Non-Compliant

  N/A

• Free distance below the lower panel is respected?

  Compliant

  Non-Compliant

  N/A

• Immediately after ramming, head of pile (minimum the upper 2cm all around pile) is cleaned, and is repaired with 100 microns of zinc rich paint?

  Compliant

  Non-Compliant

  N/A

• For all mutual holes in the connections between SADEF profiles corresponding bolts and nuts have been used?

  Compliant

  Non-Compliant

  N/A

• Torque moment on bolts M8, M12 & M16 as specified by SADEF is respected?

  Compliant

  Non-Compliant

  N/A

• If prescribed, all washers have been placed?

  Compliant

  Non-Compliant

  N/A

• Table alignment is OK? (in longitudinal direction no shadow from one tablet to another?)

  Compliant

  Non-Compliant

  N/A

• All parts (marks) on the SADEF structural drawing are mounted?

  Compliant

  Non-Compliant

  N/A

• Panel alignment is OK?

  Compliant

  Non-Compliant

  N/A

• Clamps sets are assembled following the SADEF clamp set summary (or Assembly Guidelines)?

  Compliant

  Non-Compliant

  N/A

• Clamps are placed parallel to the PV panel?

  Compliant

  Non-Compliant

  N/A

• Lateral gap between PV panel and clamp is lower than 2mm, and between 2 panels the max. distance is 21mm?

  Compliant

  Non-Compliant

  N/A

Overall Check

• general opinion

  Compliant

  Non-Compliant

  N/A