Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Electronic / Power supply

  • Check main PCB connectors

  • Check power supply connectors

Keyboard Assembly

  • Check keyboard connectors

  • Check print ready LED

  • Check service LED

Input Air Control

  • Check pressure switch

  • Check input air filter

  • Check input regulator and pressure

Solenoid Bank & Vacuum System

  • Check "ink add" solenoid

  • Check "make up add" solenoid

  • Check nozzle solenoid

  • Adjust vacuum setting

  • Check vacuum filter

  • Check exhaust

  • Check "ink low" operation

Ink Management System

  • Check in-line ink filters

  • Check final filter

  • Check all ink lines (stainless fittings) and tighten as required

  • Check all ink lines (brass fittings) and tighten as required

  • Check return line

Print Head

  • Check barb fittings in ink line

  • Check nozzle electrical connection

  • Check charge tunnel and connections

  • Check HV plate height and connections

  • Check return block and connection

  • Major service?

  • Auto Re-fresh (30 minutes)

  • Set break-off

  • Set ink pressure

  • Ink pressure value

  • New set point taken

  • Set nozzle drive formation

  • Select from range

  • Set vertical alignment

  • Set horizontal alignment

General

  • Clean printhead \ Printer

  • Final main console

  • Test print

  • Serial Number

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.