Title Page

  • Conducted on

  • 600 Read Road St Catharines, ON L2R 7K6
  • Procedure: Place wand on top of a package and run through machine. Repeat for each wand. Test the product package used for verification. If any tests fail, Corrective Action must be taken and a Corrective & Preventive Action Report completed. A corrective action report must be filled out if the metal detection procedure indicates there is metal in a product. If the metal detector detects metal, but the product passes through without any incident a 2nd or 3rd time by being put through at a different angle, a corrective action report does not have to be completed, in this incidence document "False Read" in the "N/A" Section of the "Corrective Action Required" question. If 2 units in one lot show indications of metal contamination that lot shall be put on hold. If 3 or more units in a day show indications of metal contamination the day's production shall be put on hold

  • Product information
  • Time

  • Reason for Check (i.e. product start, metal detected, end of day, etc.) see codes below

  • Product Code

  • What Metal Detector Program was used?

  • Ferrous Test Piece Used

  • Non-ferrous Test Piece Used

  • Stainless Steel Test Piece Used

  • Product package used for verification tested?

  • Corrective Action Required

  • Why?


  • Assessor's Name & Signature

  • Management Review


  • Were there any Corrective Actions Required?

  • Please List Associated Corrective Action Report(s)

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.