Title Page
-
Geographic location of audit
-
Faller being audited:
-
Auditor:
-
Date:
-
Project:
-
Block (if applicable):
Rainfall shutdown criteria and other block related weather concerns
-
Faller knows rainfall limits and weather concerns
Timber Type
-
Old growth or second growth , average diameter, largest diameter felled
-
General tree condition......% snags and danger trees, % windfalls
Ground conditions
-
Rock bluffs, slide areas, ravines/ incised gullies
-
Average slope
Audit terminology
-
Pass - Pass Fail - Fail
-
N/A - not applicable
-
NOB - not observed
PPE & Safety Tools
-
Hard hat ( age ), ear muff condition, face screen condition
-
Pressure band, whistle, gloves
-
Hi-vis shirt & rain gear
-
Approved saw-cut leg protection
-
Road signs / access control
-
Known emergency heli-landing?
-
Caulk boots (sharp)
-
Personal F.A. kit
-
Pressure bandage
-
2-way radio
-
DT & trail ribbon
-
Axe 3.5lb, 17" min handle length
-
Back up axe - 3.5 lb with 17" min handle length...... if in old growth back up axe must have min 24" length handle
-
3 wedges + 2 spares
-
Wedges are dressed with no burrs
-
Palm lock, chain brake, ignition switch
-
Safe working distance
-
Buddy system & checks
-
Daily work plan signed off
-
Medivac / ERP doc can be in paper or digital format - must be in close proximity as to allow for quick and easy reference.
-
Map - can be paper or digital - must be in close proximity as to allow for timely reference
-
First Aid Assessment & FA equipment
-
What is a condition of upset?
Workmanship & Professional Practices
-
Danger Trees: recorded, mapped, marked in field, NWZ installed, assessed prior to working in proximity
-
Check, check, and re-check demonstrated
Faller Observations
-
NOTE: Auditor is to be in a safe location which permits observation of faller's work practices
-
Has faller conducted Site Hazard Assessment of his immediate work are prior to commencing falling activities?
-
Falling plan verified with falling partner?
-
10 minute flagged or cut trail to falling partner?
-
Does faller assess tree condition prior to initiating falling cuts?
-
Is Faller adequately clearing the stump?
-
Use of face screen?
-
Correct hand/ thumb position while using saw?
-
Applies chain brake while walking but not actively cutting when saw is running?
-
Use of axe / wedges - sets wedges before "driving" them with the axe
-
Avoids excessive back barring?
-
Knows procedures for overcoming various hazards
-
Demonstrates procedure for dealing with limb tied trees, pushing trees to overcome a difficulty?
-
Did faller mention the option of calling his partner over for advice and assistance in order to overcome a falling difficulty?
-
Escape route used (+10ft/3m) cover?
-
Buddy check at scheduled 30 minute intervals?
-
After falling, does faller check canopy for overhead hazards, loose ground debris etc prior to bucking or falling next tree?
-
Avoids excessive brushing of standing timber?
-
Brushing-out around tree and escape trail adequately?
-
Stump whiskers removed?
-
Limbs cut flush (no pig ears)?
-
Limbing technique
Timber Lay
-
Matched cuts & dropped
-
Butt defect addressed
-
Weight card followed
-
Working with the timber
-
Avoids runaways
-
Bucking to grade (card)
Helispots & Helipads
-
Heli pad clear of obstructions and loose debris
-
Trees-lines for overhead hazards?
-
Built to SOPs & painted / numbered?
Stumps
-
Observed stumps - photos required
-
General observations regarding stump quality
-
Photos taken
-
undefined
Other pertinent site observations
-
Observed opportunities for improvement .....these are not safety violations but rather items that will improve the faller's work flow and processes
Corrective action plan for any noted deficiencies
-
Observed deficiencies and associated corrective action & timeline
Signatures
-
Faller Signature
-
Faller's email
-
Auditor Signature
-
Note - Print hard copy of audit for project book
