Title Page

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

Final Inspection Checklist

  • Contractor

  • Date of Inspection

  • Job Number

  • Builder

  • Address

Please note - All the below is a requirement to carry out on each job as part of the 2 hour Final Inspection/maintenance. (Double tap any question to provide additional comments or photos)

  • I have carried out a final clean of the gutters and blown out any debris

  • I have inspected the pointing for any cracks or damage and repaired what's reasonable. (Contact supervisor if an unreasonable amount and provide photos)

  • I have checked over the roof for broken tiles, jaws, large chips and changed any reasonable amount of tiles that do not comply with Bristile and Australian Standards. If an unreasonable amount exists, I have consulted my supervisor for further instructions. If so, what are supervisors instructions?

  • I have completed the cold glaze as per docket and has been completed to Bristile Roofings standard, including sufficient coating to valley cuts.

  • Are there any protrusions or other items installed on the roof? <br>IE: Flumes, antennas, solar ect. <br>If so, please specify and take photos.

  • Is there any additional work to be carried out or any concerns with the roof that the builder should be aware of? (Including but not limited to- cement staining, leaching, disturbed ridge, Ridge after flashing, malicious damage ect).<br>If so, contact your Supervisor and note down approximate cost of work with photos.

  • A visual inspection from the ground level has been carried out of each accessible elevation<br>

  • I have placed a sticker in the meter box confirming work that has been carried out.

Please provide multiple images of each elevation.

  • Front elevation taken from ground and roof

  • Right hand Elevation taken from roof

  • Rear elevation taken from roof

  • Left hand elevation taken from roof.

I can confirm this job has been inspected in accordance with the above points and has been deemed to have met Australian Standards, Company quality standards and is in a presentable state for the client.

  • Additional comments

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.