Fire Door Inspection

• Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Fire Door Inspection

Fire Door

Door Location

• Location

• BM TRADA Q-Mark

  Select FD30 FD60 FD90 FD120 Not Fitted

  • FD30
  • FD60
  • FD90
  • FD120
  • Not Fitted

• Fire Door Signage

  N/A

  Fire Door Keep Locked

  Fire Door Keep Shut

  Electrical Hazard

  Automatic Door Keep Clear

• Comments

About the Door

• Does the door leaf sit against the door stop and is it free from distortion?

  Yes

  No

  N/A

• Describe the issues present

• If the door is veneered or lipped, is the glue still holding these products firmly in place?

  Yes

  No

  N/A

Door Frame

• Is the frame in a good state of repair?

  Yes

  No

  N/A

• Is the door frame securely attached to the wall?

  Yes

  No

  N/A

• If a planted door stop is present, is it firmly attached?

  Yes

  No

  N/A

• Is the frame to door leaf gap consistently 4mm maximum?

  Yes

  No

  N/A

Door Seals

• Are intumescent seals in place?

  Yes

  No

  N/A

• What Size and Type are they

  Select 10mm Flat 10mm Combined 15mm Flat 15mm Combined More than 15mm Surface mounted

  • 10mm Flat
  • 10mm Combined
  • 15mm Flat
  • 15mm Combined
  • More than 15mm
  • Surface mounted

• Are the seals well attached inside the groove in the door leaf or frame?

  Yes

  No

  N/A

• Are brush or fin type seals free from damage?

  Yes

  No

  N/A

• Are the smoke seals continuous around the door leaf or door frame?

  Yes

  No

  N/A

Hinges

• Are there a minimum of 3 hinges with all the screws fitted?

  Yes

  No

  N/A

• Are all the screws the correct size?

  Yes

  No

  N/A

• Are the hinges free from non-combustible packaging?

  Yes

  No

  N/A

• Are the hinges CE marked

  Yes

  No

  N/A

• Comment on the hinges fitted

Door Closers

• Open the door to 75mm or 5 degrees. Does it close and engage with the latch?

  Yes

  No

  N/A

• Is the closer securely attached to the door and the frame?

  Yes

  No

  N/A

• Is the closer free from damage?

  Yes

  No

  N/A

• If unlatched does the closer hold the door in line with the frame and intumescent seal?

  Yes

  No

  N/A

• If hung in pairs, do they close in line if both are opened and released together?

  Yes

  No

  N/A

• If hold open devices is used, is it electronically or sound opperated

  Select Electronic Magnet type (floor or wall) Electronic Closer type Sound activated type

  • Electronic Magnet type (floor or wall)
  • Electronic Closer type
  • Sound activated type

• Does the hold open device release the door when required?

  Yes

  No

  N/A

Lock & Latch

• Does the latch hold the door firmly in the frame without rattling

  Yes

  No

  N/A

Glazing & Glass

• Is the intumescent seal continuous and attached to the glass and bead?

  Yes

  No

  N/A

• Are the glazing beads well attached to the frame and free from damage?

  Yes

  No

  N/A

• Is the glass free from cracking or damage

  Yes

  No

  N/A

• If the glass has been replaced is it fire rated glass?

  Yes

  No

  N/A

Threshold Gap

• Is there a consistent gap under the door that allows it to swing without touching the floor covering?

  Yes

  No

  N/A

• Is the door to floor covering gap consistently 8mm (3mm for smoke control) or less when the door is closed?

  Yes

  No

  N/A

• If the door leaf is fitted with a threshold seal, does the seal make contact with the floor covering when the door is closed?

  Yes

  No

  N/A

Compliance

• Compliance Rating

  Compliant

  Non-compliant

Comments

• Add Comments to this report