Information
-
Site conducted
-
Inspection Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Personnel
- Door
-
Door Reference Number
Fixtures and Fittings
-
Priority of door
- 1 (eg. protection to fire escape route or staircase)
- 2 (eg. lobby protection to staircase, cross corridor doors)
- 3 (doors to risk room not on an escape route - eg plant room, kitchens)
-
Type of Fire Door?
- FD20
- FD20S
- FD30
- FD30S
- FD60
- FD60S
- FD90
- FD90S
- Unknown
-
Number of Door leaves?
- 1
- 2 (includes 1/4 and 1/2 door leaves)
-
Swing Type?
-
Size of gap around door
-
Size of gap to threshold
-
Glazing?
-
Number of Hinges?
-
Type of door closer?
- Overhead
- Perco
- Surface mounted
- Sprung hinge
- Floor plate
- None
-
Smoke seals fitted?
-
Intumescent strips fitted?
-
Door release systems?
- None fitted
- Push bar to open
- Push pad to open
- Simple fastening (thumb turn)
- Redlam bolt (break glass release bolt)
- Break fastening (green box or button)
-
Door signage?
- Fire door keep shut (or closed)
- Fire door keep locked
- Automatic fire door keep clear
- Fire door keep clear
- Push bar (or pad) to open
- Turn to open
- Break glass to open
- Push button to open
- None
-
Is the door satisfactory? <br>Indicating "yes" confirms that all the fixtures and fittings are correct and the door closes fully onto the door stops within 30 seconds and with no excessive gaps between the door and door frame (or other door leaf).
Door Closer Operation
-
1. Is the door self closer fixed to door and frame securely?
-
1a. Has door closing arm been separated from the frame?
-
1b. Is there any oil leaking from the door SC device?
-
1c. Does the door close fully onto the door stops?
Door Handles
-
1. Is the door handle functioning correctly?
-
2. Are they loose or missing?
-
3. Can the door be opened without the use of a key?
-
4. If required to do so, does the door open in direction of travel to the fire exit?
Door Seals
-
1. Does the door have intumescent seals around the top and 2 edges (not the bottom of the door) or in the door frame?
-
2. Are the fire seals in good condition? (i.e. not missing or damaged)
-
3. Does the door (or frame) have cold smoke seals in the form of brushes or rubber strip?
-
3a. Are they in good condition, missing or damaged?
Glazing in Door
-
1. Is the glazing in the fire door loose, does it rattle or is it broken?
-
2. Are the vision panels in the door clear and unobstructed to provide safety to door uses on both sides if the leaf?
Door Hinges
-
1. Does the door leaf have have 3 or more hinges?
-
2. Are they loose or are screws missing?
Door Damage
-
1. Is the door damaged?
-
1a. Take a photo of damaged.
Doors Wedged Open
-
1. Has door wedged open with anything that is not a approved device complying with BS5839? (Remove obstruction and report persons if known)
-
1a. Take a photo of obstruction
Faults & Remedial Actions
-
What areas require remedial action?
- Fire door type incorrect
- Door damaged
- Door frame damaged
- Glazing missing or loose
- Hinges missing or loose
- Door closer missing or not functioning
- Door holder not functioning
- Smoke seals missing or damaged
- Intumescent strips missing or damaged
- Signage missing
- gaps to door leaf too large
- gaps to threshold too large
- incorrect handle type
- thumbturn lock required
- Hole in door where lock was removed
-
What level of repair is needed?
- 3 (Significant repair or adjustment needed)
- 2 (moderate repair or adjustment needed)
- 1 (simple repair or adjustment needed)
-
Description of Faults