Fire Safety & Evacuation

Does the plant have a written procedure relative to the control, handling, storage & use of flammable? If yes, is it followed?

Are all storage facilities in compliance with fire regulations?

Are there adequate number of fire fighters on site at all times?

How many hours of training does each member receive per year?

Are there adequate number of fire extinguishers of the right type at the right locations?

Are these regularly tested & refilled? Are the records maintained?

Are employees familiar with the proper procedure for the use of fire extinguishers?

Are water supplies adequate considering pressure, volumes & quantity in regard to fire protection needs of the factory?

Should any services fail during an emergency (eg power, water) , do suitable alternatives exist?

If fire detection systems are installed, are they correctly maintained & recorded?

Are plant fire prevention/protection inspection reports reviewed by Management on regular basis?

Is the fire protection system approved by Insurance & TAC ?

Is the factory equipped with a fire alarm system?

Is it tested regularly?

Is it audible in all parts of the factory?

Are "No Smoking" areas clearly defined?

Are solvent pipe lines clearly marked?

Are there any dripping taps on solvent lines?

Are anti-static devices fitted where necessary?

Is there a comprehensive written fire evacuation Procedure?

Are regular drills held by each department?

Are there sufficient emergency exits?

Are they well marked?

Is the factory equipped with public Address system?

Is it tested regularly?

Are all personnel conversant with the action to be taken in the event of a fire?