Title Page
-
Audit Title
-
Clients Name and Lot Number
-
Conducted on
-
Prepared by
-
Location
-
Name: LBP Or Registered Applicator.
-
Registration Number:
Documentation
-
Producer Statement Required ?
-
Exposure Zone Correct ?
-
Consent Approved Products Used ?
-
Installation Warranty Required ?
-
Framing / Wraps And Cavity Inspections Completed ?
-
Type
-
Installers Name
-
Elevation:
-
Balcony / Decks - With Adequate Fall And Overflow Drains ?
Documentation Comments
-
Comments.
-
Consent Number:
-
Date:
Roofing
-
Roofing Integrity
-
Down Pipes (Size And Fixing)
-
Internal Gutters
-
Flashings
-
Outlets
-
Roof Slope
-
Kick Outs
-
Fixings
-
Spouting Clearance
-
Spreaders
-
Penetrations
-
Overflows
-
Roofing Complete
Brick Veneer
-
Type
- Clay
- Concrete
- Single Storey
- Two Storey
- Bottom Storey
- Top Storey
-
Sealer Sighted At Rebate
-
Ties
-
Tape Required For Studs (Over 450mm)
-
Weep Holes And Vents Every 4th Vertical Joint
-
Lintel /Shelf Angles Supports And Fixings.
-
Seismic Joints / Slip Joints
-
Pipes And Services Clear From Cavity
-
Flashings Correctly Installed (Windows, Doors, Kick Outs, Roofs, Parapets, Decks, Chimney)
-
Meter Board Flashings
-
Ground Clearance, (Measure In mm)
-
Sealing Of Penetrations
-
Cavity Clean
-
Cavity Size (Measure In mm)
-
Junctions - Wall To Wall & Wall To Roof
-
Gable Studs At 450mm Centres
Metal Cladding/ Weather Boards
-
Type
-
Cavity Base And Ventilation
-
Flashings Correctly Installed (Windows, Doors, Roofs, Parapets, Decks, Chimney)
-
Meter Board Flashings
-
Clearance Behind Fascias, Barge, Facing, Spoutings Etc (20mm Minimum)
-
Correct Clearance At Roofs, Decks (35mm minimum)
-
Measurement in mm
-
Capillary Gap Behind Cladding (6mm Minimum Measurement)
-
Measurement In mm
-
Adequate Ground Clearance
-
Measurement In mm
-
Sealing Of Penetrations
-
Differing Cladding Junctions
-
Consent Number
-
Date
-
Solid Plaster System
-
Proprietary Plaster System
-
First Coat
-
Second Coat
-
Type:
-
Appropriate Foundations
-
Tape Required For Stud (Over 450mm)
-
Substrate (RAB) Fixed To Manufacturer's Specifications.
-
Bracing Panel Fixings Installed
-
Cavity Base And/Or Head Ventilation And Vermin Protection (Cavity Closer)
-
Correct Reinforcing Materials And Reinforcing To Corner Of Openings
-
Reinforcing Overlaps, Spacing From Substrate And Fixing
-
Jointing To Manufacturer's Specifications
-
Control / Expansion Joints - Vertical And/Or Horizontal (4mm Maximum)
-
Flashings Correctly Installed (Windows, Doors, Roofs, Parapets)
-
Meter Board Flashings
-
Sealing Of Penetrations- Electrical Cables Sleeved
-
Clearance Behind Fascias, Barge, Facings, Spoutings, Etc. (20mm Minimum)
-
Correct Clearance At Roofs, Decks (35mm Minimum)
-
Measurement In mm
-
Capillary Gap Behind Cladding (6mm Minimum)
-
Measurement In mm
-
Adequate Ground Clearance (Measure)
-
Measurement In mm
-
Reveals/Facings To Joinery Of Face Sealed Cladding?
-
Junctions- Wall To Wall and Wall To Roof
-
Drip Edge
-
Gable Studs At 450mm Centres
-
Specify Area Checked
-
Specify Items Checked
