Title Page
-
Document No.
-
Angle Grinder Use Checksheet
-
Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Equipment Inspection
-
Handles are fitted to all handheld grinders (no dispensation regardless of size)?
-
Dead man switch fitted to all hand held grinders
-
Are there any 9" grinders on site (prohibited)
-
Guards securely fitted to all grinders
-
Correct discs used for task (i.e. grinding discs for grinding, cutting discs for cutting only) 1.6mm minimum cutting disc thickness,
-
RPM of disc matches / exceeds RPM of grinder
-
No visible signs of damage to grinder, or lead
-
All 240 volt handheld grinders have current electrical test & tag
Personnel and Procedures
-
Personnel using grinder competently
-
Equipment is adequately inspected prior to use (leads, casing, tagging, RCD, discs)
-
Work environment set-up to control risks to others (i.e. screens, potential fire sources removed)
-
Hot work permit current and authorised.
-
Correct PPE worn: medium impact rated double eye protection (if welding helmet worn- lens & shell AS impact rated), gloves, hearing protection