Information

  • Document No.

  • Electric Motor Checklist

General

  • Time

  • ITP Inspection

  • Inspection Type

  • Basic Location

  • Specific Location/s

  • Attendees

  • Other Attendees

1. Name Plate Installed

  • Add notes

  • Add photos

2. Motor 3.3 kV, 690v, 415v

  • The LCS and the FCI shall be one unit with two separate compartments, one for the power isolation section and one for the local control section. Each compartment shall have individual access doors.

  • Add notes

  • Add photos

3. IP 66

  • Minimum rating.

  • Add notes

  • Add photos

4. DOL / VSD

  • Which is fitted.

  • Add notes

  • Add photos

5. Thermistors

  • Are thermistors fitted?

  • Add notes

  • Add photos

6. Heater

  • Is heater fitted?

  • Add notes

  • Add photos

7. Cable Access

  • Small motors (<75kW), looped into a full pig-tail. Larger motors (75kW and above) require a slack full half-loop.

  • Add notes

  • Add photos

8. Motor Reversing

  • Phase reversing shall be performed at the motor terminal box by reversing RED and BLUE phases. Enough length needs to be left on cores to facilitate this action.

  • Add notes

  • Add photos

9. Earth Potential

  • Connected to the main earth bar via the equipotential earth backbone.

  • Add notes

  • Add photos

10. Labels

  • All equipment shall be identified by a label attached to a non-detachable part.

  • Add notes

  • Add photos

Inspector

  • Inspector

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.