ICS Roofing - Composite panels

• Site conducted

  Select

• Audit Title

• Project Name

• Conducted on

  Date

• Prepared by

• Location
  Address

• Instructions
  -------------------
  1. Answer "Checked" or "Hold" for the questions below, then identify the personnel who conducted the checking.
  2. Add photos and notes by clicking on the paperclip icon.
  3. To add a Corrective Measure click on the paperclip icon, then "Add Action", provide a description, assign to a member, set priority and due date.
  4. Complete audit by providing digital signature.
  5. Share your report by exporting as PDF, Word, Excel or Web Link

Eurobond

• Main Contractor:

• Project Number:

• Issued to:

• QA Sheet No:

• Elevation:

• Level:

• Comments:

Steel Frame

• Check steelkwork is within tolerances : Column spacing as drawing, Column Level, Height, Datums marked by site engineer.

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• Structural fixings as drawings and specification.

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

Primary Seals

• Check if all Tapes and sealants are in place.

  Yes

  No

  N/A

• Personnel

  Select Installer ICS

  • Installer
  • ICS

Panels

• Check that panels are un-damaged as they are removed from pallets and that there is no sigificant colour variation. <br>

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• Panel are properly engaged into each other and horizontal joints aligned with adjacent panels. <br>

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• Protective film to be removed from panel faces prior to installation (unless instructed otherwise by client).

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• All gaps between panel joints to be fully packed with either loose rockwool or fire rated canister grade foam.

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

Flashings and Secondary Seals

• Horizontal base drip cover flashings to be installed with rivet or torx head screws at miniumum 450mm centres. Miniumum 60mm wide profiled butt straps to be sealed behind each flashing.

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• Continuous butyl tape applied between flashing and panel to prevent water ingress.

  Checked

  Hold

• Personnel

  Select Installer ICS

  • Installer
  • ICS

• Vertical joint and corner flashings to be fixed to panel with rivet or torx head screws as per spec.

  Checked

  Hold

• Personnel

  Installer

  ICS

• Profiled butt straps present at flashing joints. <br>

  Checked

  Hold

• Personnel

  Installer

  ICS

Completion

• Installer Signature:

  Sign

• ICS Signature:

  Sign

• Client Signature:

  Sign