Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Ensure all safety signage is in place
-
Remove all offcuts from machine bed and rollers
-
Inspect hydraulic components for leaks
-
Inspect ram seals for leaks and dirt build up
-
Inspect hydraulic components for damage or wear
-
Inspect the level and condition of hydraulic oil
-
Remove and clean hydraulic filter
-
Inspect the level and condition of transmission oil
-
Inspect the frame for bent or broken components
-
Inspect band saw blade for damage, kinks and missing or broken teeth
-
Check the tension on the band saw blade
-
Inspect the bed for worn or damage components
-
Check the wire brush for proper contact with the saw blade
-
Check the alignment of the blade
-
Lubricate the idler wheel with grease
-
Lubricate the blade tension device with grease
-
Lubricate the dovetail guide with grease
-
Clean and lubricate roller bearings with oil
-
Lubricate bearings at grease nipples
-
Inspect rollover to bed high alignment using a straight edge
-
Remove covers and inspect blade guides and rollers
-
Clean chips and swarf from blade guides and rollers
-
Clean chips and swarf from blade guides and associated components
-
Clean chips and swarf from the coolant drain and strainer
-
Inspect the level and condition of the coolant
-
Check the operation of the coolant pump and delivery hoses
-
Check all controls are operating correctly
-
Inspect the operation of the on/off switch and E-Stop if fitted
-
Signature of person conducting maintenance
