Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
All safety signage in place
-
Add details of missing or damaged signage
-
Check guards and shields are tight and secure
-
Ensure machine is clean and free from off cuts and swarf
-
Lubricate machine at lubrication points, there are 5 point on each side of the machine body
-
Inspect shear blades, punch and die components are all in good condition
-
Inspect body for any loose or worn components
-
Inspect hydraulic components for leaks
-
Inspect hydraulic components for damage or wear
-
Inspect body for any loose or worn components
-
Inspect the level and condition of the hydraulic oil
-
Inspect the bed winch cable and components
-
Remove and clean the suction filter from the hydraulic tank
-
Inspect the operation of the work lighting
-
Inspect foot switches and leads for damage, wear or loose components
-
Check operation of controls
-
Check operation of pump, listen for unusual noises
-
Inspect operation of on/off switch and E-Stop where fitted.
-
Person conducting maintenance to sign
