Information

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

  • Ensure all safety signage is in place

  • Remove all off cuts from tray

  • Inspect hydraulic system for leaks

  • Inspect hydraulic system for worn or damaged components

  • Lubricate the cylinder with grease

  • Lubricate the main pivot points with grease

  • Lubricate the backstop shaft, screws and bolts with grease

  • Lubricate clamp beam sides with grease

  • Inspect the level and condition of hydraulic oil

  • Lubricate all grease nipples

  • Lightly lubricate backstop square drive

  • Inspect the shearing blade for damage and wear

  • Clean hydraulic breather cap in white spirits

  • Inspect the operation of the shadow line lighting

  • Inspect the accuracy of the shadow line, adjust if required

  • Inspect the condition of the body, insure no loose or worn components

  • Inspect the operation of the on/off switch and E-Stop if fitted

  • Inspect operation of the break beam safety system

  • Clean off dust and dirt

  • Signature of person conducting maintenance

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.