Information

  • Audit Title

  • Conducted on

  • Prepared by

  • Location
  • Ensure all safety signage is in place

  • Take a Photo of the offending signage

  • Are guards and shield are tight and secure ?

  • Clean and lubricate bed

  • Clean and Lubricate Bed

  • Check Blade Gap

  • Adjusted

  • Inspect external set square adjustment

  • Adjusted

  • Lubricate the guiding rods with grease

  • Inspect condition of hydraulic oil

  • Inspect the oil level on the hydraulic tank (ref E-1.2 oil level display in manual)

  • Oil topped up

  • Clean and lightly lubricate the the blade carrier and slots with oil

  • Inspect the condition of the oil filter

  • Date Cleaned

  • Date replaced

  • The area between the bottom blade holder that touches the handle wheel should be cleaned and lubricated

  • Inspect operation of the on/off switch and E-Stop were fitted

  • Note action taken to repair and or isolate

  • Signature of person conducting maintenance

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.